Thread: Cut Engineered Board
View Single Post
  #9 (permalink)  
Old 10-08-2007, 09:48 AM
Jerry Peck Jerry Peck is offline
Member
  
Join Date: Mar 2007
Location: Ormond Beach, Florida
Posts: 7,648
Re: Cut Engineered Board
Quote:
Originally Posted by PETER W BENNETT View Post
But here's another issue: does the cut board provide "structural" support for the plywood subfloor?
I doubt it.

You would need "framing", i.e. 2x, for that. Ever try to nail into the side of plywood or OSB? Don't count on it for doing much at all.
__________________
Jerry Peck, Construction / Litigation Consultant
Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
Reply With Quote