View Single Post
  #5 (permalink)  
Old 05-06-2008, 06:33 PM
Jerry Peck Jerry Peck is offline
Member
 
Join Date: Mar 2007
Location: Ormond Beach, Florida
Posts: 6,644
Re: metal flue strapping
Quote:
Originally Posted by Jerry McCarthy View Post
I'm not Bob either, but under the UMC vent support is in the manufacturer's installation instructions from what I recall.
ALL codes say to install per manufacturer's installation instructions, which is why I figured Bob would have more of off the top of his head than I did by looking for them.

This is from the Simpson instructions: "Wall Straps should be used to support the vertical pipe as needed to provide a secure installation. Wall Straps every four feet are recommended. "
__________________
Jerry Peck, Construction / Litigation Consultant
Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
EastWestData (www.EastWestData.com )
Reply With Quote