View Single Post
  #2 (permalink)  
Old 05-07-2008, 04:39 PM
Jerry Peck Jerry Peck is online now
Member
 
Join Date: Mar 2007
Location: Ormond Beach, Florida
Posts: 6,246
Re: any suggestions for this exposed feeder
Yes, in PVC, and abandon that opening through the sea wall and have it come up out of the ground behind the sea wall and over the top of the sea wall.

Then seal up that hole. That could be a rusted off metal conduit, which will only make the above a bit more difficult (except that I don't see the tell-tale rust signs from rusted out metal conduit).
__________________
Jerry Peck, Construction / Litigation Consultant
Ormond Beach, Florida
Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
Reply With Quote