View Single Post
  #3 (permalink)  
Old 05-08-2008, 12:50 PM
Jon Randolph Jon Randolph is offline
Member
 
Join Date: Mar 2007
Location: Indianapolis, Indiana
Posts: 339
Re: FPE and Zinsco Panels
· Monitor, Possible Major Concern: You have a Federal Pacific electric service panel which, historically, has a possibility that the circuit breakers may not trip when their amperage rating has been greatly exceeded. Opinions about this panel vary among licensed electricians. I recommend you consult a licensed electrician for an in depth evaluation, load testing and correction if necessary.
· Monitor, Possible Major Concern: You have a Zinsco electric service panel. This is an older panel and it is hard to find replacement breakers. This panel does however have a history of electrical arcing inside the panel. Arcing will be evident by the presence of “soot” and burned areas inside the panel. Replacement is not needed if no problem currently exists, but if a buzzing noise or smoke is ever noticed at this panel, DO NOT touch the panel but contact a licensed electrician immediately.
__________________
Integrity Inspection Service, LLC
www.irsindy.com
(317) 345-1828
Reply With Quote