|
Re: What were they thinking?
I thought THIS was sorta' special: a little "ramp" catching some sort of leakage or condensation from the far side of the air handler (there is no drain for the pan, but there is a float switch at the far end of the pan, not visible in this picture),.
I presume they must have installed that elbow and vertical tube because they did not have a plug.
anyway, mu question is: can you even drain the A-coil's pan from below like that?... I've always see it done on the side on a horizontal air handler.
Last edited by Michael Thomas : 06-09-2008 at 02:47 PM.
|