Thread: Pool Heater clearance
View Single Post
  #5 (permalink)  
Old 07-01-2009, 08:56 AM
Jerry Peck's Avatar
Jerry Peck Jerry Peck is offline
Member
  
Join Date: Mar 2007
Location: Ormond Beach, Florida
Posts: 14,293
Re: Pool Heater clearance
Quote:
Originally Posted by Wayne Carlisle View Post
2. A mechanical draft venting system, excluding direct-vent appliances, shall terminate at least 4 feet (1219 mm) below, 4 feet (1219 mm) horizontally from, or 1 foot (305 mm) above any door, operable window, or gravity air inlet into any building. The bottom of the vent terminal shall be located at least 12 inches (305 mm) above grade.

Except that is not a mechanical draft venting system. That is a natural draft venting system.

Thus that does not apply.
__________________
Jerry Peck, Construction / Litigation Consultant
Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
www.AskCodeMan.com
Reply With Quote