PDA

View Full Version : Gas control valve in firebox


Ron Bishop
10-22-2008, 07:35 AM
It seems to me that this gas control is awfully close to flame...any thoughts?
Eric Barker
10-22-2008, 09:23 AM
As far as I know it's ok for gas log, not wood burning.
Ron Bishop
10-22-2008, 09:54 AM
thank you kindly
Jerry Peck
10-22-2008, 10:36 AM
Eric is correct. That is 'part of' a listed and labeled gas log set. You can see the insulation on the floor, which is intended to look like 'burning embers' when the gas log set is on and burning.
Bob Harper
10-22-2008, 03:39 PM
Valve is fine if the entire set is listed to ANSI Z21.60. However, that gas knockout to the right is not properly sealed.
Ron Bishop
10-22-2008, 05:01 PM
good point
Billy Stephens
10-22-2008, 05:10 PM
good point
.
Boom, Boom, Baby! :D
.
Jerry Peck
10-22-2008, 05:20 PM
However, that gas knockout to the right is not properly sealed.

Didn't see that.

However, is "properly sealed" the right phrase? :) That implies it is sealed. :D