PDA

View Full Version : Can you help with this panel ?



Ron Bibler
02-20-2009, 09:47 PM
I think this guy has just about over stuff every hole. L.O.L.

What a mess :eek:

And then to top it off this panel is 30 feet below ground with an under ground service. The main is at the top of the driveway some 100 feet away with a Zinsco 200amp Main on the side of a pole...

Best

Ron

Billy Stephens
02-20-2009, 09:58 PM
Thread title: Can you help with this panel?

Ron,

Here You Go. :D
.

Matt Fellman
02-20-2009, 10:14 PM
I agree with Billy....

As for the specifics, I'll wait the others to chime in. In general, that looks like either a newer Zinsco or a total rewire (done by Billy Bob homeowner, I'm sure).

I don't see any cables older than about 1970's. Most Zinsco panels I see are from the 50's or early 60's but I did run across one that I think was in the mid to late 70's.

A.D. Miller
02-21-2009, 06:41 AM
I think this guy has just about over stuff every hole. L.O.L.

What a mess :eek:

And then to top it off this panel is 30 feet below ground with an under ground service. The main is at the top of the driveway some 100 feet away with a Zinsco 200amp Main on the side of a pole...

Best

Ron

Ron: It is a Zinsco which is a true mess, and a shame. Why go to all that trouble to rewire an arc welder in a box.