View Full Version : New water heater installation
Michael Vasquez
05-04-2009, 05:51 PM
In an existing house, when a new water heater is installed, should an in-sight or lockable disconnect also be installed if one was not available before?
Thanks
Jerry Peck
05-04-2009, 08:02 PM
It was a requirement for the original one and is still a requirement, so the answer is yes.
Jerry McCarthy
05-05-2009, 09:07 AM
Refer 2008 NEC Article 422.47.
Jerry Peck
05-05-2009, 09:58 AM
Refer 2008 NEC Article 422.47.
WC Jerry,
You mean 422.31, right? ;)
Jerry McCarthy
05-07-2009, 09:10 AM
Yep. Haste makes waste and my memory ain't what it used to be and as my Doc says, "getting old is not for sissys."
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.