PDA

View Full Version : Chimney Chase



mathew stouffer
06-25-2009, 08:50 PM
I am no copper worker, but I would appreciate your thoughts on this.

Mat

John Kogel
06-25-2009, 09:09 PM
It is a temporary patch, repair required.

Darin Redding
06-25-2009, 09:14 PM
Looks like a get-er-close, tape-er-up to me ;)

Jerry Peck
06-26-2009, 06:08 AM
Is that a chimney vent termination for a gas fireplace?

If so, there is no storm collar, and the decorative shroud is not allowed unless listed for that use (Bob H. taught us that, I often wondered about it before that).

mathew stouffer
06-26-2009, 06:42 AM
Jerry,
It is for a wood fireplace and there is a flue next to it for a gas fireplace.

Jerry Peck
06-26-2009, 07:16 AM
Mat,

The one in the photo is not for the wood fireplace is it?

Jim Luttrall
06-26-2009, 07:24 AM
It looks like the outer pipe is too short and the storm collar won't fit the smaller inner pipe so they used tape and painted over it.
No matter, it is wrong and needs to be fixed.
Probably the only thing saving it from leaking like a sieve is the outer cover which, as Jerry mentioned, may not be allowed.

mathew stouffer
06-26-2009, 09:35 AM
Jerry, It is for a wood fire place, you can see the soot on the arestor.