Deck flashing

[wayne soper]

What do you guys think of useing a weather shield type prodcut as flashing between the house and deck?

[Billy Stephens]

What do you guys think of using a weather shield type product as flashing between the house and deck?
.

See IRC R703.8

*then take a nap. :D
.

[Billy Stephens]

.

See IRC R703.8

*then take a nap. :D
.
.
and page 8 of attachment.

IRC Deck file too large to upload.
.

[Jim Luttrall]

SIDING AND FLASHING: House siding, or the exterior finish system, must be removed prior to the
installation of the ledger board. Flashing is required at any ledger board connection to a wall of wood
framed construction and shall be composed of copper (attached using copper
nails), stainless steel, UV resistant plastic or galvanized steel coated with 1.85
oz/sf of zinc (G-185 coating). See FIGURE 14 for continuous flashing with drip
edge. The threshold shall be carefully flashed and caulked to prevent water
intrusion due to splashing from the deck or melting snow and ice.
From Billy's reference

[wayne soper]

Thanks guys, Thanks for the nap Billy. I owe you one!

[Bud Butczynski]

And from our friends at Inspectapedia:

http://www.inspect-ny.com/BestPractices/Figure4-8ss.jpg (http://www.inspect-ny.com/BestPractices/Figure4-8s.jpg)

[wayne soper]

Thanks BUD, good one! mabey tonite I should be calling you BUD WISER:D Or was that why I could'nt find the code reference? Hmmmm, I wonder?
Respectfully, George Thorogood