PDA

View Full Version : weave


wayne soper
08-08-2009, 08:22 AM
I'm looking at this weave and seeing that it is woven too high from the valley. Is that what you see or am I see ing things?
Vern Heiler
08-08-2009, 08:51 AM
Looks like intersection of two different pitches. The valley should have been open or cut design.
wayne soper
08-08-2009, 10:41 AM
I am seeing that the top two rows of weave were not staggered properly and threw it all off. I agree that an open or cut valley would have been the way to go. This is new consrtuction by the way. I recommended repairs.
Vern Heiler
08-08-2009, 11:26 AM
The weave goes from the bottom up and the top being off is a result of not being a 45deg. angle.

Re due of the valley is the correct thing to do IMO.
Jon Errickson
09-02-2009, 11:27 AM
What are the consequences of not redoing the valley?
Billy Stephens
09-02-2009, 11:51 AM
.
What are the consequences of not redoing the valley?
.
If they not Installed Per Manufactures Installation Instructions ( and they are not ) it Voids the Warranty.
.
More Prone to Damage from Wind Lift.
.
Gaps under the shingles will collect windblown debris ( leafs, twigs, dirt ) shorting the life of the shingles.
.
* would you want a Brand New Home or New Roof with this defect?
.
wayne soper
09-02-2009, 02:11 PM
Billy, were you away on vacation or too busy. This post was from Aug 8th. They have already bought AND sold the house waiting for your reply.
Gee and I told them everything was A OK!!:D
Billy Stephens
09-02-2009, 02:42 PM
;99465
were you away on vacation or too busy.
This post was from Aug 8th.

They have already bought AND sold the house waiting for your reply.

Gee and I told them everything was A OK!!:D
.
Just Waiting For The Process Server to Find You. :eek:
.
Hope You Know a Good Roofer ( that takes Master Card.) :D
.