Correct junction between masonry chimney and BUR

[Michael Thomas]

Does anyone have a diagram of the correct method of making this transition?

Thanks.

[BARRY ADAIR]

I use the one at bottom of page

Copper.org: Architecture Design Handbook: Architectural Details: Flashings and Copings - Stepped and Chimney Flashings (http://www.copper.org/applications/architecture/arch_dhb/flashings_copings/chimney.html)

may already be under all that deteriorated material

[Michael Thomas]

Thanks

[John Kogel]

I think Barry has a good eye and he can see a chimney flashing under all that tar. :)
That roof/wall flashing on the lower left of pic1 is a piece of work too.

[Joao Vieira]

the flashing membrane in the vertical plane should be terminated per BARRY ADAIR link or have a least a termination bar fastened properly to the brick where the flashing is installed.