PDA

View Full Version : copper high loop



John Arnold
11-12-2009, 12:46 PM
A first for me. Never seen a copper high loop before.

Wayne Carlisle
11-12-2009, 01:42 PM
That is supposed to take care of water hammer.

Scott Patterson
11-12-2009, 01:54 PM
That is supposed to take care of water hammer.

It's connected to to the garbage disposal, so this is from the dishwasher and not the supply.

Wayne Carlisle
11-12-2009, 01:56 PM
DOAK!!!!!!!!!!!

Jerrod Christian
11-13-2009, 05:37 PM
1/2" is not acceptable by the plumbing code for a drain for the dw.It should be 3/4" which is what the inlet for the disposal inlet is.

Billy Stephens
11-13-2009, 05:45 PM
.
1/2" is not acceptable by the plumbing code for a drain for the dw.
.
It should be 3/4" which is what the inlet for the disposal inlet is.
.
Jerrod,

Nice Eye !

Welcome to the Board
* but do you realize how much 3/4 inch cooper cost? :D
.

Jerrod Christian
11-13-2009, 05:56 PM
Copper tubing is expensive but most dw come with a flexible drain hose or you can buy a rubber hose at any home improvement store which is what the older dw came with.