PDA

View Full Version : AAV & Dishwasher Tie-in



William Engle
11-18-2009, 08:50 PM
I am just finishing a new bar sink in my basement. The 2" sink drain is in the wall (horizontal) and I will be bringing the 2" pipe into the back of the sink base. I will be using an Oatey Sure Vent (AAV) as adding a vent line was going to be problematic. I am looking for any advise on a piping diagram to plumb a single bar sink, dishwasher drain, and AAV into the wall. Any suggestions?

I am in Douglas County, Colorado and AAV's are permissable.

Thanks in advance.

Bill

Billy Stephens
11-18-2009, 09:13 PM
.
I am just finishing a new bar sink in my basement.

Any suggestions?


.
Hire a Competent, Licensed Plumber. ;)
* make sure He Keeps The Power Tools in the Truck.:eek:

Bob Elliott
11-18-2009, 10:21 PM
Here is a good discussion .

Google Image Result for http://www.homerepairforum.com/images/uploads/2004-12-12_air%20inlet%20valve%20II_w550.JPG (http://images.google.com/imgres?imgurl=http://www.homerepairforum.com/images/uploads/2004-12-12_air%2520inlet%2520valve%2520II_w550.JPG&imgrefurl=http://www.terrylove.com/forums/showthread.php%3Ft%3D21235&usg=__50kFYX84G2XDCChUdNoO-nFHJ_c=&h=650&w=550&sz=34&hl=en&start=2&sig2=qI4RN3EsIIRCTvBwdwFWyw&um=1&tbnid=fOz0Ic36W8Yf8M:&tbnh=137&tbnw=116&prev=/images%3Fq%3Daav%2Binstall%26hl%3Den%26safe%3Doff% 26rlz%3D1B3MOZA_enUS340US340%26sa%3DN%26um%3D1&ei=v9QES7yuPMWMnAfL97XTCw)