PDA

View Full Version : Need some help?



Brian Hannigan
03-31-2007, 04:37 AM
Hi,

If you need help using the board or wonder what it can and/or can't do just let me know.

Brian E Kelly
04-05-2007, 10:55 AM
My main question is the use of spell check. From what I have read in other posts reguarding this there should be an icon in the upper right hand side of the thread that I am replying to. There is no such icon or any such item. Pleased advise.

Brian Hannigan
04-05-2007, 11:15 AM
Hi Brian,

You should have the editing controls over the message box (the one I am typing in right here). Do you see them? See the attached picture.

http://www.inspectionnews.net/home_inspection/attachments/h-e-l-p/128d1175792731-bold-text-editor.gif

I'm starting to wonder if everyone does see it. I thought I had it set as a default but maybe not?

Please let em know so I can correct this.

If you do not see the editing icons then do this:

Go to your Users CP (upper left on the menu bar)

Select "Edit Options"

Go to the bottom of the page and under "Message Editor Interface" select "Enhanced Interface" in the drop-down.

While you are there make sure your "Skin" is set to "CA Evo"

Brian E Kelly
04-05-2007, 12:53 PM
I do not have the info you had on the link. Not sure if it me or what?

Jim Luttrall
04-05-2007, 01:11 PM
The default does not have the spell check, etc.
It did come up for me when I changed the setting as Brian mentioned.

Brian Hannigan
04-05-2007, 01:12 PM
I do not have the info you had on the link. Not sure if it me or what?


Interesting.

Follow these directions and you will enjoy the board a lot more.

If you do not see the editing icons then do this:

Go to your Users CP (upper left on the menu bar)

Select "Edit Options"

Go to the bottom of the page and under "Message Editor Interface" select "Enhanced Interface" in the drop-down.

While you are there make sure your "Skin" is set to "CA Evo"

Brian E Kelly
04-06-2007, 05:15 AM
Brian
Look at that it worked. Thanks
Not sure what you mean by "skin is set to CAEVO" ?

Bruce Thomas
04-06-2007, 05:36 PM
Brian,

So now I don't have to cut and paste from Word just tolook literate. :D

This is very Cool:cool:

Bruce

PS I did have to change my settings