PDA

View Full Version : Gotta Have Tool



Bruce Ramsey
02-18-2010, 12:00 PM
At the last association meeting, a few of the old timers made presentation about the one item they always have in the truck or with them during an inspection.

Items included:
Roll of TP
Electrical probe
Expandable paint pole with proble on the end

What is the one tool, gadget, item that you always have with you on an inspection?

Troy Eskew
02-18-2010, 12:13 PM
HDD Video Camera

Bruce Breedlove
02-18-2010, 02:06 PM
Voltage sniffer. Great to check if abandoned wiring is dead (e.g., K&T wiring).

Dom D'Agostino
02-18-2010, 02:33 PM
What is the one tool, gadget, item that you always have with you on an inspection?


The single tool that I always, or must, have is a flashlight.

Scott Patterson
02-18-2010, 02:50 PM
TP aka a Sweetroll is a must!

I use a trekking pole for an extra long probe. They collapse down to about a foot in length and most can be outfitted with a spike tip.

A few extra bottles of water.

Small first aid kit.

Wasp spray.

Insect repellent for me. Great for fleas and ticks.

stanley frost
02-18-2010, 05:30 PM
My little giant ladder. Not only to get on the roof but to get in the attic it can't be beat.Sometimes I've had to remove shelves in a closet to gain access, if it wasn't for the flexiblity of the little giant ladder i wouldn't have made it in or out.

Raymond Wand
02-18-2010, 06:17 PM
My eye glasses.

Jerry Peck
02-18-2010, 08:18 PM
An open-minded brain.

One must ... MUST ... use the single most important tool they have for what it was intended and designed for - THINKING about what is HEARD, SEEN, SMELLED, TOUCHED, and TASTED, and ... THINKING about what IS NOT heard, seen, smelled, touched, or tasted.

John Kogel
02-18-2010, 09:15 PM
An open-minded brain.

Accessible memory banks. :)

My hand is a measuring tool, 8" from thumb tip to pinky. It goes everywhere my brain goes, too.

Ken Rowe
02-18-2010, 09:37 PM
Must haves
Vehicle
Flashlight
GFCI Tester
Voltage sniffer with modded antennae
Expandable ladder
Screwdrivers w/standard and Philips tips
Cell phoneNice to have
Cordless screwdriver
Battery powered drill
Laser thermometer
Inspection mirrors
Laser pointer
Gas leak detector
CO analyzer
UL rated metal tape
Blue painter's tape (for marking gas leaks)
Clamp on voltage meter
laptop w/inspection software
Moisture meter
Digital camera
Torpedo level
4 foot levelThings I wish I had
Thermal camera
Sewer camera
Laser levelThings I have never needed on an inspection
Toilet paper
probes
expandable poles
Video camera
Tape measure

Jack Feldmann
02-19-2010, 11:11 AM
Flashlight for me - propane torch didn't work out so well.

Rick Souter
02-19-2010, 06:11 PM
A Respirator.
Broken bones will heal.
I've abused my lungs enough in this life.
And besides, the smell of rat urine makes me gag.
R

Jerry Peck
02-19-2010, 06:32 PM
My hand is a measuring tool, 8" from thumb tip to pinky.


You've got small hands. ;)

I always thought my hands were small at 9-1/2" tip of pinky to tip of thumb. :confused:

Rick Cantrell
02-19-2010, 06:39 PM
"Broken bones will heal."

Something tells me that you have not broken a bone, in your 40's.
12 years, bothers me EVERY day, hurts many days.

Billy Stephens
02-19-2010, 07:50 PM
GPS,
Can't Inspect What I can't get to.
.

Rick Souter
02-19-2010, 08:00 PM
Accessible memory banks. :)

My hand is a measuring tool, 8" from thumb tip to pinky. It goes everywhere my brain goes, too.

John....and being from the west coast....they're webbed. Mine are!:cool:

R

curtis vilt
02-20-2010, 09:13 AM
I am new to this site and hope this is the proper place to ask, What kind of re bar detection device do you use and any input on same would be greatly appreciated

Rick Hurst
02-20-2010, 09:26 AM
I am new to this site and hope this is the proper place to ask, What kind of re bar detection device do you use and any input on same would be greatly appreciated


You are kidding right. I've never known one HI in all my times to have such a tool or a need for one.

curtis vilt
02-20-2010, 10:13 AM
No Rick I'm not kidding. This came up in a discussion with a friend that's doing Wind Mitigation Inspections. He was asked how he verifies rebar placement and roof deck nailing pattern.After a little investigation he found one HI using a detector.(similar to a stud finder) I told him I would ask here.It does make sense to me but I'm just starting in the HI Business and trying to kick the Builder mentality out of my head while going thru the learning process of this Business.I value you input

Rick Hurst
02-20-2010, 11:21 AM
Curtis,

Again, I've just never heard of anyone using such a tool. I believe when you use such specialized tools you may be setting yourself up of some big liability issues.

Just my opinion.

rick

John Kogel
02-20-2010, 01:40 PM
You've got small hands. ;)

I always thought my hands were small at 9-1/2" tip of pinky to tip of thumb. :confused:Mine are Canadian inches, Jerry. :)
Did you know our 10 gallon hats hold 12 US gallons? :)

Dom D'Agostino
02-20-2010, 03:12 PM
Curtis,

Again, I've just never heard of anyone using such a tool. I believe when you use such specialized tools you may be setting yourself up of some big liability issues.

Just my opinion.

rick



Rick, They're not for standard inspections.

I own one (Zircon MT6) for locating the rebar in CMU walls and other specific tasks (roof sheathing nailing pattern, for example) required for a certain specialized inspection here in Florida.

I never use it for a regular HI job.

Dom.

chris mcintyre
02-20-2010, 05:25 PM
Rick, They're not for standard inspections.

I own one (Zircon MT6) for locating the rebar in CMU walls and other specific tasks (roof sheathing nailing pattern, for example) required for a certain specialized inspection here in Florida.

I never use it for a regular HI job.

Dom.

I'll be darned, I thought this was a joke too. Learn something new every day.


Zircon MySafe Florida Home Information (http://www.zircon.com/special/mysafe.html)



In order to reduce future hurricane vulnerability, Florida homeowners are eligible for a matching-funds grant of up to $5,000 toward improvements that will increase residential wind resistance.
To qualify, the home must undergo a Mitigation Survey by a qualified contractor or inspector. The survey requires the use of a specialized metal detection tool in order to measure subsurface nail spacing, and the location of rebar in masonry.

curtis vilt
02-20-2010, 05:32 PM
Dom,Thank you that is what I was looking for.

A.D. Miller
02-23-2010, 04:49 AM
This is an absolute must-have accessory for any vehicle -

YouTube - Trunk Monkey Compilation (http://www.youtube.com/watch?v=8avOiTUcD4Y)

Nick Ostrowski
02-23-2010, 09:37 PM
I won't go out without my "overbearing parent repellant". I set the speaker up in the back yard and when needed, I press the remote control ON button and it screams "Dad, I need help". Clears the room out every time.

A.D. Miller
02-24-2010, 04:47 AM
I won't go out without my "overbearing parent repellant". I set the speaker up in the back yard and when needed, I press the remote control ON button and it screams "Dad, I need help". Clears the room out every time.

NO: In my service area most of the parents, uncles, brothers, etc. who arrive on site are of the Republican persuasion. Most are also very PC and Sunday morning christians. If provoked, I simply start channeling George Carlin or Bill Maher. It never fails to remove the irritants from the premises.:D

Marc M
02-26-2010, 08:09 AM
1 Snickers bar - small
1 can of Monster energy
(16 oz for under 3000sq ft 32 oz for over)

mark tyson
02-26-2010, 01:24 PM
No Rick I'm not kidding. This came up in a discussion with a friend that's doing Wind Mitigation Inspections. He was asked how he verifies rebar placement and roof deck nailing pattern.After a little investigation he found one HI using a detector.(similar to a stud finder) I told him I would ask here.It does make sense to me but I'm just starting in the HI Business and trying to kick the Builder mentality out of my head while going thru the learning process of this Business.I value you input
Curtis,
Zircon MetalliScanner 6.0 or Mt-6 will do both. The Uniform Mitigation verification Ispection Form OIR-B1-1802 requires verification that the home is of reinforced masonry construction and you must check 2 corners and 1 window too confirm that rebar is in place. i know that it sounds ridicuious but that is what happens when the Office of Insurance requlation gets into the construction business

Steve Beliveau
02-26-2010, 04:10 PM
DIGITAL VOICE RECORDER (2, in case one fails).

Feel extremely vulnerable and liable without. Simply talk to yourself about everything you see (Client gets used to it). Sometimes over 100 messages/ inspection. How many are in my Report?

NEVER have missed writing something down. If it ain't on PAPER, it never happened! In fact you're pretty well guaranteed to forget to write something down if you DON'T use one.

Plus faster - can listen and complete several pages of info in one sitting.

Also great while driving, musing life's innovative ideas, many other times a day. Almost credit card size, a few ounces, and only $40.00

Don't get caught without one!

Jerry Peck
02-26-2010, 08:21 PM
DIGITAL VOICE RECORDER (2, in case one fails).

I've never had paper notes fail. :D

I can see why you would want to use two ... at the same time :p ... so that if one fails you have not lost your entire inspection ... :p

:D

A.D. Miller
02-27-2010, 05:21 AM
DIGITAL VOICE RECORDER (2, in case one fails).

SB: Three, if you count my Blackberry.


If it ain't on PAPER, it never happened!

SB: Yep, and if it is not written down, it does not have to be trotted out at depositions.



In fact you're pretty well guaranteed to forget to write something down if you DON'T use one.


SB: Agreed.

Nick Ostrowski
02-27-2010, 07:41 AM
I had one voice recorder recently crap out on me but I didn't realize it until I sat down to complete the report. 87 voice notes of dead air. Something either happened with the recording feature or the speaker but nothing was there. I took plenty of pictures though so I wasn't totally out of luck.

Same thing can happen with any of the equipment we use. I had the bulbs die on two Streamlights during the same inspection and I had no backup bulbs. Can't recall how that one turned out. Once as I was setting up my extension ladder and pulling down on the rope to raise the top section, the rope broke from cumulative exposure to sun. I had to leave my ladder there and run to big orange to get some replacement rope and a rope clamp. The first digital camera I used ate batteries and sometimes left me being really choosy about what I took pictures of in order to save some power.

All of our equipment is subject to failure at one time or another.

A.D. Miller
02-27-2010, 07:55 AM
I had one voice recorder recently crap out on me but I didn't realize it until I sat down to complete the report. 87 voice notes of dead air. Something either happened with the recording feature or the speaker but nothing was there. I took plenty of pictures though so I wasn't totally out of luck.

NO: I have had that happen a couple of times. That is when you resort to the default wetware.:D

Nick Ostrowski
02-27-2010, 08:16 AM
The voice recorders are great little tools. I used to write everything down on a yellow memo pad and then I saw my doctor recording notes from my visits on a voice recorder. The light bulb went on in my head and I wondered why I wasn't using one too. It's so much more convenient and faster at the inspection. Plus it's funny to listen to my notes and occassionally hear the disgust in my voice as I describe some of the atrocities. Equally amusing is when an unseen dog on the other side of a fence barks at me and and induces a reactionary expletive.

A.D. Miller
02-27-2010, 08:24 AM
The voice recorders are great little tools. I used to write everything down on a yellow memo pad and then I saw my doctor recording notes from my visits on a voice recorder. The light bulb went on in my head and I wondered why I wasn't using one too. It's so much more convenient and faster at the inspection. Plus it's funny to listen to my notes and occasionally hear the disgust in my voice as I describe some of the atrocities. Equally amusing is when an unseen dog on the other side of a fence barks at me and and induces a reactionary expletive.

NO: They have other uses as well. Because I am walking around for a couple of hours with the recorder in my hand, no one there thinks anything about it. As soon as a seller, agent, or builder starts talking, I turn it on. You would be surprised how many times these recordings have come in handy. I use an Olympus VN-5200PC which I can use to download the recordings to a file on my computer. Seller/agent/builder lies, threats, etc. often get included in the inspection report.:D

Nick Ostrowski
02-27-2010, 08:42 AM
I've got the Olympus as well Aaron, the 6200. It has the capability to download onto my computer but I haven't done that yet or had a need to. When I compleet the report, the voice notes get erased.

Jerry Peck
02-27-2010, 12:17 PM
When I compleet the report, the voice notes get erased.


SB: Yep, and if it is not written down, it does not have to be trotted out at depositions.


Not when the notes are disposed of after writing the report, just like with erasing the voice recorder - there is no requirement to keep written notes - either way (written notes or voice recorder notes) the notes are disposed of, leaving only the report to stand on its own ... which it will be required to do anyway if you are being sued.

Dan Harris
02-27-2010, 01:31 PM
I've never had paper notes fail. :D

:D

I've lost them in the far end of the attic, in the middle of summer, and only discovered it after I was back at the access. :)

A.D. Miller
02-27-2010, 02:49 PM
Not when the notes are disposed of after writing the report, just like with erasing the voice recorder - there is no requirement to keep written notes - either way (written notes or voice recorder notes) the notes are disposed of, leaving only the report to stand on its own ... which it will be required to do anyway if you are being sued.

JP: Agreed. I never keep field notes (voice recordings) that are directly related to my inspection. Only those that could be potentially injurious to those who visit my jobsite and make asses of themselves.:D

Jerry Peck
02-27-2010, 03:54 PM
Only those that could be potentially injurious to those who visit my jobsite and make asses of themselves.:D


Well, yeah, OF COURSE ... THOSE ... are saved.

I have been known to document those things in THE REPORT. :D

A.D. Miller
02-27-2010, 04:07 PM
Well, yeah, OF COURSE ... THOSE ... are saved.

I have been known to document those things in THE REPORT. :D

JP: This last December I videoed a builder ranting about how the two of us should be working together to make things easier for us, to the detriment of the buyer. I embeded that sucker in my report. Sweet . . .;)

Philippe Heller
04-19-2010, 06:33 AM
You have to check out the Panel Pal if you inspect any top-hinged electric panels. It is cheap, and keeps you from resting the panel cover on your head.

Panel Pal - Inspector and electrician tools (http://www.panelpal.com)

Michael Thomas
04-19-2010, 07:38 AM
One caution: in a lot of places (Illinois, for example) it's illegal to record a conversation without consent of the other party and often the laws have real teeth - the politicians passed them to protect themselves :D

BTW, one of the discontinued voice recorders I rave about here from time to time is up on eBay (I already have 2 spares)

Panasonic RR-US006 IC voice recorder - eBay (item 260588259728 end time Apr-25-10 14:00:42 PDT) (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260588259728&ssPageName=STRK:MEWAX:IT)

Jerry Peck
04-19-2010, 07:18 PM
You have to check out the Panel Pal if you inspect any top-hinged electric panels. It is cheap, and keeps you from resting the panel cover on your head.

Panel Pal - Inspector and electrician tools (http://www.panelpal.com)


Some one posted that a while ago too, and here is a BIG DRAW BACK to using one of those ... (hint: NO WAY WOULD I USE ONE for this reason) ...

"Anodized Aluminum"

"Aluminum" is CONDUCTIVE and there is no way I would want to use ANYTHING CONDUCTIVE to hold that cover up! :eek:

Philippe Heller
04-19-2010, 07:59 PM
Who would stick this or any tool into the panel? I'd rather have a tool take the charge rather than my head. This tool sits firmly to the SIDE of the panel, and unless an inspector was completely careless, and rammed this into the panel, it is nowhere near the energized components.

This tool is really handy on those old panels such as Zinscos, that won't stay open anymore. It holds the cover out of the way so that the dead front can be removed, and the inspector can stand somewhat to the side of the panel, to avoid arcs or potential injury. It works as advertised.

By the way, anodized aluminum is less conductive that bare aluminum or steel.

Ron Bibler
04-19-2010, 10:37 PM
I was thinking about the bar finder. ( bar detection device )

Like the dude needed a drink before his inspection and so he needed a bar finder:D

So what would that be ? :D

Best

Ron

Jack Feldmann
04-20-2010, 04:28 AM
When I find a panel cover that won't stay open, I get my paint pole probe and use it. It's fiberglass. Since I wear a ball cap most of the time outside, I don't mind using my head.

Philippe Heller
04-20-2010, 05:51 AM
You should reconsider unless your baseball cap is made of something other than cloth.

Here's the problem with paint poles; most guys will not take the time to go back to the truck to get it. Since the pole will not fit in your tool pouch, I bet you don't use it most of the time.

I agree that it is much faster to just use your head as a ground rod.

Jerry Peck
04-20-2010, 06:23 PM
By the way, anodized aluminum is less conductive that bare aluminum or steel.

"less conductive" as in "still conductive" :rolleyes:

A short piece of 2x4, about 5 or 10 minutes with a saber saw, and you would have a nice non-conductive one.

Plastic would be better.

As I said, NO WAY would I stick something conductive like that there to prop the panel cover up. Guess you have never seen the direction things fall when they fall, especially with the dead front cover removed (which is, after all, the reason you would be using it in the first place). I also guess you have never seen an arc flash, because if you had you would not consider using something which is conductive there either ... just in case.

Philippe Heller
04-20-2010, 07:17 PM
The point is that the vast majority of inspectors rest the cover on their head. Probably the most dangerous practice short of standing in a bucket of water. I would bet that the vast majority of inspectors do not use any alternative to using their head.

I would argue that a tool carved from a piece of 2x4, or a paint stick, are actually more likely to slip allowing the cover to fall and shove someone's hand or the dead front into the panel.

By the way the tool is coated in a thick plastic coating over 80 % of the tool, so it is about as exposed as a screwdriver.

There is always a risk with everythig we do - using a ladder, turning on a furnace, walking on a roof etc. We all use tools to help with various tasks and if we work safely, we'll be just fine. No tool is perfect, but I'd say this is a big step in the right direction and provides a safer environment in which to work than without something to hold open the panel. I've completed hundreds of inspections since getting Panel Pal without even a hint of a problem, and I would not give it back.

Jerry Peck
04-20-2010, 07:34 PM
By the way the tool is coated in a thick plastic coating over 80 % of the tool, so it is about as exposed as a screwdriver.

And you have never arced welded with a screwdriver in a panel? :confused:


There is always a risk with everythig we do ...

Yep.

And adding risk with using that tool is not something I am going to do or recommend others to do.

It would be a no brainer to make a wood brace shaped like that and which would not slip any more than that one would as it would be using the same forces holding it in place as that one uses.

Philippe Heller
04-20-2010, 07:42 PM
No, I have not arced a screwdriver in the panel. That would not be using best practices to inspect a panel. Why was a screwdriver being inserted into an energized panel? THAT is where a wood tool comes in handy.

Try it. Widdle one out of wood and let us know how it works.

Jerry Peck
04-21-2010, 06:51 PM
No, I have not arced a screwdriver in the panel. That would not be using best practices to inspect a panel. Why was a screwdriver being inserted into an energized panel? THAT is where a wood tool comes in handy.


Guess you've never done any electrical work, have you?

It would be VERY difficult to tighten screws with a WOOD screwdriver. :rolleyes:

Philippe Heller
04-21-2010, 06:59 PM
Having done electrical work is not the issue. I worked for GE Power Systems for nearly 10 years, and SDG&E before that. I know a thing or two about electricity and safety when working around it.

We are talking HOME INSPECTIONS here. Isn't that the theme of this discussion board?

I would fire any of my inspectors if I saw them inserting a screw driver inside the panel. They should only observe the inside of the panel and report what they see. If it is over-stuffed, they just report that. They do NOT poke around, nor dig through the wires with a screw driver. Come on. That's inspection 101.

Dan Harris
04-21-2010, 07:11 PM
I would fire any of my inspectors if I saw them inserting a screw driver inside the panel. They should only observe the inside of the panel and report what they see. If it is over-stuffed, they just report that. They do NOT poke around, nor dig through the wires with a screw driver. Come on. That's inspection 101.

Well heck.. If I ever decide to move to Calif. I guess I won't apply to your company for a job. :D
I move wires all the time if I cannot see the ground or nuetral connection, and run my screw driver down every wire at the breaker, even tightened a few screws if the wiring is not damaged.

Jerry Peck
04-21-2010, 07:14 PM
We are talking HOME INSPECTIONS here. Isn't that the theme of this discussion board?


And you have never arced welded with a screwdriver in a panel? :confused:


Obviously missing the entire point of the discussion too.

*IF* ... yes, that big *IF* ... *IF* you have ever arced a screwdriver OR ANYTHING you would realize and understand why you do NOT want to stick a piece of METAL up against the side of the enclosure to hold the cover open - ESPECIALLY WHEN THE DEAD FRONT COVER has been removed.

And here I thought you were just be callous about YOUR life, now I find out you are being callous about the lives of your employees! :eek:

Philippe Heller
04-21-2010, 07:29 PM
Dan, since you don't have any fear of inserting metal into a live panel, I'd be interested to know how you hold open the panel cover.

Would you consider this tool dangerous? It does not go inside the panel, but is applied prior to opening the dead front.

Jerry, you see by Dan's comments that inspectors do stick metal tools into the panel. If the cover is on Dan's head, he can easily be killed if he contacts an energized component.

The safety of my inspectors is paramount. I take offense that you would suggest otherwise. That is why we use the tool. I'd rather have them use Panel Pal than not. I've seen everything used from bungie cords, paint sticks, paint poles, vice grips, binder clips, etc. Any of those options are feeble at best, or they don't get used because they add a step (going back to the truck). Panel Pal fits in the tool pouch so that it is always handy.

You should try it and then decide before dismissing it.

Trent Tarter
04-21-2010, 10:36 PM
My favorite low cost tool is my Klein 10 in 1 screw/nut driver. It works for most everything.

Jerry Peck
04-22-2010, 07:13 PM
The safety of my inspectors is paramount. I take offense that you would suggest otherwise. That is why we use the tool.


Take offense if you feel it helps you feel better, I suggest otherwise BECAUSE you use that METAL tool at an OPEN and EXPOSED electrical panel. Taking offense only indicates that you fail to grasp the gravity of doing what you are having your inspectors do. :rolleyes:

Philippe Heller
04-22-2010, 09:05 PM
I do take offense that you pass judgement without knowing anything about how my business is run, our training, or how I treat my inspectors.

You parse everyone's words without addressing the topic. You take personal shots and try to bully everyone on this board. I rarely see any useful input from you.

I believe it is you who takes offense when someone doesn't agree with you. It's interesting that you only critique some people's comments, but you have nothing to say about guys like Dan above who run a metal screw driver along live wires. Interesting.

So Jerry, since you are such an authority, please share how you inspect panels so that the rest of us can do it safely? After all, that is the reason for this message board.

John Dirks Jr
04-22-2010, 11:04 PM
Fortitude to ignore realtors with ethic issues.

The other day I had one suggest that I lie to my client about what time I got there. He wanted me to claim that I had already been there for an hour. I guess he wanted the inspection over quick.

I told him, "I'm gonna be here for at least 3 hours but you can leave whenever you want".

Steven Udelle
04-23-2010, 07:13 AM
Gunk brand Brake Cleaner Spray! It will snuff out a wasp nest and drop them in mid-flight with no staining or residue as it quickly evaporates. I have had it up to here with nasty-tempered paper wasps! They're not paying any rent you know.

Dave Gilstrap
04-23-2010, 10:21 AM
After inspecting a lot of bank owned homes I am sure glad I had some toilet paper in the truck the other day!!!! And did any of you measure your hands?

Daniel Mummey
04-23-2010, 07:21 PM
Remember, the more you can see, detect, or test for beyond certification, best practices & professional standards the more you can be held responsible for!

Rick Vernon
04-25-2010, 07:47 PM
Steve U,
I use WD40. Now I'll have to see which is cheaper.

Jerry Peck
04-25-2010, 08:00 PM
So Jerry, since you are such an authority, please share how you inspect panels so that the rest of us can do it safely? After all, that is the reason for this message board.


I suspect a lot like YOU do. :rolleyes:

Ron Isaacson
04-27-2010, 09:53 AM
A few tools that I use and come in very handy during an inspection;

For checking, probing, tracking wiring in an electric panel:
*A large plastic knitting needle (no metal head). It’s non-conductive, non-corrosive, Great tool for checking connections and can be used as a pointer when showing clients what’s going on.

For checking, probing and lifting float switches in sump pits, inspecting open sewage pipes etc:
*An old Fiberglass Bow (as in bow & arrow). It’s non-conductive, non-corrosive, easy to wipe clean and spray with Lysol or anti-bacterial Great tool for checking float switches.

Also a very handy tool to take into crawl spaces to: clear a path through cob webs, probe dead rats, check the depth of standing water, probe junction boxes etc.
*An old Fiberglass Bow that has been shortened (as in bow & arrow). It’s non-conductive, non-corrosive, easy to wipe clean

For testing water dispensers on refrigerator doors:
*A collapsible plastic cup

For easy access to lots of small stuff:
*An extended length, multi pocket, canvas hunting vest. Beats walking around with a tool bag. Keeps the clients wondering what else is in those pockets. Extra screws for electric panels, probes, gas valve key, absorbent sham wow, testers etc.

Always have !!
**A bunch of business cards-enough to give a few to everyone at the inspection while telling them that referrals are 90% of my business.

**Name Badge

**Slippers with rubber soles – I hate blue booties

**A clip board w/ pages so clients can keep their own notes as an adjunct to my report.