Double Taps

[Tom Rees]

How can you tell which Square D breakers are designed for two wires at screw down?:D

[Rick Cantrell]

If you got really, really good eyes, you might be able to read it on the breaker, or you can look at the terminal clamp.

[Jim Port]

Sq D 15-30 amp breakers are listed for one or two conductors. Larger sizes are for one conductor only.

[John Dirks Jr]

Here is whats printed on the side of the SQ-D's.

[John Dirks Jr]

That pic was too small. Here's another.

[Chap Fichera]

But that's only for the same gauge wire on each breaker?