PDA

View Full Version : Double Taps


Tom Rees
03-19-2010, 06:15 AM
How can you tell which Square D breakers are designed for two wires at screw down?:D
Rick Cantrell
03-19-2010, 06:19 AM
If you got really, really good eyes, you might be able to read it on the breaker, or you can look at the terminal clamp.
Jim Port
03-19-2010, 07:21 AM
Sq D 15-30 amp breakers are listed for one or two conductors. Larger sizes are for one conductor only.
John Dirks Jr
03-21-2010, 06:24 PM
Here is whats printed on the side of the SQ-D's.
John Dirks Jr
03-21-2010, 06:27 PM
That pic was too small. Here's another.
Chap Fichera
03-22-2010, 03:52 AM
But that's only for the same gauge wire on each breaker?