PDA

View Full Version : What's this wire for?



Marc M
05-12-2010, 09:40 PM
Wuts up with the wire? Haven't seen this one before.

Jim Luttrall
05-12-2010, 09:54 PM
Low voltage sensor that kills the unit if water is present.

Marc M
05-12-2010, 11:05 PM
Big Jim...thanks.

Jerry Peck
05-13-2010, 05:42 PM
Low voltage sensor that kills the unit if water is present.

Then proceeds to cause the unit to leak condensation all over the place as a result of that shutting down. :)

It is a result of pressure from the HVAC contractors to allow that switch without also requiring what would stop that from happening.