View Full Version : Corrosion at coil
sidney alstad
03-05-2011, 09:08 PM
It is rare that I see the coil at a home inspection, however this coil was visible at a recent inspection of a modular home. From what I've heard and read the corrosion shown in the attached picture is typical. (only about the coil, not the pan). Is this correct?...or have I been misinformed.
Thanks in advance.
Markus Keller
03-06-2011, 04:22 PM
Yeah, that's pretty much what I see when I can actually get the panel open to take a look.
Rick Hurst
03-06-2011, 05:53 PM
Same here.
rick
sidney alstad
03-06-2011, 06:04 PM
Thank you Mr Keller and Mr Hurst
DANIEL SNYDER
03-07-2011, 09:44 AM
That is fairly consistent, but in homes with Chinese drywall the entire coil would be black from the sufuric acid when the material in the drywall comes in contact with the wet coil.
You may see more corrosion where the copper coil comes in contact with the steel frame or the coil.
Stephen Houmard
03-07-2011, 04:00 PM
Looks like our coils here in Charleston. Some one has been using a thick restrictive filter and causing a lot of condensation.
Powered by vBulletin® Version 4.2.0 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.