Shannon Allen
04-04-2011, 07:26 AM
I'll apologize for the length of this post, but most of it is correspondence that explains my situation. In short, is it worth my time to sit in on a local meeting to convince local appointed officials that they are misinterpreting code or should I just leave well enough alone - wait unil an inaccessible motor catches fire or something and let someone else address it. Apparently in 2005 Louisiana adopted the "Louisiana Code Council" a 19 member board to address enforcement issues, however I read last week that their position is that they can't actually "force" a municipality to comply, just ask them.
I know that accessibility to “hydromassage” mechanical and electrical equipment has probably been beaten to death here, however I sent the following email following a phone call to both the builder and to the Ascension Parish Building Official, both of which told me that there were thousands of houses being built just like mine and that if I wanted or needed access to the motor, just cut the surround off and there you go.
__________________________________________________ _______
Copy of: Review of Access to Whirlpool tub motor
Sent: Wed 3/23/2011 4:09 PM
AscensionParish.NET webmaster@apgov.us (webmaster@apgov.us)
Copy of:
This is an enquiry e-mail via http://www.ascensionparish.net/ (http://www.ascensionparish.net/) from:
Shannon Allen <shannon@shannonallenonline.com (shannon@shannonallenonline.com)>
Mr. Bourgeois,
Thank you for taking time yesterday afternoon to discuss with me, my confusion and concerns with code requirements for the residential installation of a whirlpool tub, in Ascension Parish.
I understand that your office has posted the following Mission Statement: “We provide Ascension Parish residents and contractors impartial and professional guidance through Planning, Zoning and Permitting procedures and to help economically grow and develop Ascension Parish while protecting the safety and property of our residents.”
If I understand our telephone conversation of yesterday afternoon, it is the position of your office that removal of a 24 square foot piece of marble (approximate dimension), by way of cutting through with a razor blade or similar object, and removing all caulking and/or adhesive materials is an acceptable means of access, as required by code, to the motor of such a whirlpool tub for maintenance or replacement of the motor or any electrical or mechanical equipment.
It is my understanding that Louisiana requires all buildings intended for human occupancy to adhere to IBC 2006, excluding Ch's 1, 11, 27, 29 with no amendments and NEC 2005 with no amendments, among of course a host of other codes.
The National Electrical Code (NEC), in particular, is a United States standard for the safe installation of electrical wiring and equipment and is part of the National Fire Codes series published by the National Fire Protection Association (NFPA). It is the “authority having jurisdiction” who inspects for compliance with these minimum standards. In the U.S., anyone issuing building permits may face a civil liability for negligently creating a situation that results in loss of life or property. Those who fail to adhere to well known best practices for safety have been held negligent. This has led to the NEC becoming the de facto standard set of electrical requirements in most jurisdictions. Please advise me if in fact Ascension Parish rejects or takes exception to this standard.
As I understand, the Louisiana (AHJ) for structural, mechanical and electrical concerns is Mr. Don Zeringue, Chief Architect with the Louisiana State Fire Marshal’s Office and would be the one to lend guidance to questions of interpretation of governing code, again correct me if I am mistaken here.
I thought that in December of 2005, the Governor of Louisiana, signed a bill calling for the state to adopt the International Building Code (IBC), International Existing Buildings Code (IEBC), International Residential Code (IRC), International Mechanical Code (IMC), and the International Fuel Gas Code (IFGC).
Looking to the International Residential Code for guidance, one would find that:
IRC SECTION P2720
WHIRLPOOL BATHTUBS
P2720.1 Access to pump.
Access shall be provided to circulation pumps in accordance with the fixture manufacturer’s installation instructions. Where the manufacturer’s instructions do not specify the location and minimum size of field fabricated access openings, a 12-inch by 12-inch (304 mm by 304 mm) minimum size opening shall be installed to provide access to the circulation pump. Where pumps are located more than 2 feet (609 mm) from the access opening, an 18-inch by 18-inch (457 mm by 457 mm) minimum size opening shall be installed. A door or panel shall be permitted to close the opening. In all cases, the access opening shall be unobstructed and be of the size necessary to permit the removal and replacement of the circulation pump.
And referencing the equipment manufacturer’s recommendations for installation of the subject tub, as noted in IRC Section P2720; citing the Mansfield Pro-fit Builders Series Whirlpools and Baths, Installation Manual, page 3 of 12:
“2. Literature dimensions are for general reference only. Installation dimensions should be taken directlyfrom the bath. AN ACCESS PANEL MUST BE PROVIDED AT THE PUMP END OF THE WHIRLPOOL allowing sufficient clearance to make final connections and for servicing the pump and power panel. Access of at least 12” x 18” (305mm x 457mm) may be through the wall or platform apron at the end of the unit, or in the case of sunken installations, through the ceiling below.”
And if one were to reference the 2005 edition of the National Electrical Code:
NEC 680.73 Accessibility.
Hydromassage bathtub electrical equipment shall be accessible without damaging the building structure or building finish. (Please note the “without damaging the building structure or building finish.”).
This has become problematic enough that the NEC addressed this issue again this year and expanded in the NEC 2011 to include:
“680.73 Accessibility
The accessibility of the receptacle supplying a hydromassage tub has been revised.
680.73 Accessibility.
Electrical equipment for hydromassage bathtubs must be capable of being removed or exposed without damaging the building structure or finish.
Where the hydromassage bathtub is cord-and plug-connected with the supply receptacle accessible only through an access opening, the receptacle must face toward the opening and be within 1 ft of the opening.
Analysis: When a hydromassage tub is cord- and plug-connected, it isn’t uncommon to find the receptacle beneath the tub arranged in a manner that makes it nearly impossible to see, much less use. Oftentimes, these receptacles are several feet away from the access opening, facing away from the person trying to access the receptacle. This change now requires that such a receptacle be installed close to the access opening (within 1 ft), and it must also be facing toward the opening.”
I am of the opinion that the use of a razor blade or similar object used to cut out the entire panel might well damage the finish, thus falling short of what I believe to be the intent of the code. While that position is by no means a professional opinion, I am certain that the fact that hundreds if not thousands of them being installed outside of code would in no way serve to amend code.
Considering these facts, while I appreciate and respect your professional opinion, I shall pose this question to the State AHJ for review?
Thanks,
Shannon Allen
_______________________________________________
Later, I sent this email to the Louisiana AHJ:
Ascension Parish Residential Construction - Hydromassage Tub Installation
Sent: Fri 3/25/2011 3:59 PM
To: don.zeringue@dps.la.gov (don.zeringue@dps.la.gov)
Mr. Zeringue,
To whom do I go for guidance regarding the proper installation of a hydromassage tub.
I have spoken to both the superintendent for the builder and to the Ascension Parish Chief Building Official, Mr. Levern Bourgeois
Lavern Bourgeois
Chief Building Official / 42077 Churchpoint Rd. / Gonzales, LA 70737
Ph. 225-621-5700
Fax. 225-621-5705
Both assure me that access to the motor can be had by way of cutting completely thru the caulking and adhesive material used to secure the 24 square foot piece of tub surround. When I questioned both regarding compliance with NEC 680.73;
NEC 680.73 Accessibility.
Hydromassage bathtub electrical equipment shall be accessible without damaging the building structure or building finish.
I was told that “there were thousands installed exactly like yours” and that this was not an issue, this by Mr. Bourgeois. I did reply by way of email but he has not responded.
I have even spoken with the manufacturer of the equipment, Mansfield; they pointed me in this direction:
Mansfield Pro-fit Builders Series Whirlpools and Baths, Installation Manual, page 3 of 12:
“2. Literature dimensions are for general reference only. Installation dimensions should be taken directlyfrom the bath. AN ACCESS PANEL MUST BE PROVIDED AT THE PUMP END OF THE WHIRLPOOL allowing sufficient clearance to make final connections and for servicing the pump and power panel. Access of at least 12” x 18” (305mm x 457mm) may be through the wall or platform apron at the end of the unit, or in the case of sunken installations, through the ceiling below.”
IRC SECTION P2720
WHIRLPOOL BATHTUBS
P2720.1 Access to pump.
Access shall be provided to circulation pumps in accordance with the fixture manufacturer’s installation instructions. Where the manufacturer’s instructions do not specify the location and minimum size of field fabricated access openings, a 12-inch by 12-inch (304 mm by 304 mm) minimum size opening shall be installed to provide access to the circulation pump. Where pumps are located more than 2 feet (609 mm) from the access opening, an 18-inch by 18-inch (457 mm by 457 mm) minimum size opening shall be installed. A door or panel shall be permitted to close the opening. In all cases, the access opening shall be unobstructed and be of the size necessary to permit the removal and replacement of the circulation pump.
The question only arose when the equipment failed and will not turn off – thus I cut it off in the breaker box. My original inquiry was only to ask where physically the motor was located so that I could cut a penetration for future service or maintenance. But the defensive nature that both took alarmed me, and if “thousands” are in fact installed that way here in Ascension Parish, I wonder if the electrical hook-up was even inspected on them; could this not be a safety issue that I should consider?
Your input is greatly appreciated.
For the record, I have no problem with cutting the surround out, but that would seem, at least to me, to damage the building finish. Too, I really don’t know what I would be getting into, as the builders superintendent told me that it was glued in place then caulked and the Parish official told me that it was not glued in place, only caulked in.
Shannon Allen
_______________________________________
Still no reply, so I did follow up with my original parish official on Friday:
Copy of: No Reply to email of March 23rd
Sent: Fri 4/1/2011 3:38 PM
Copy of:
This is an enquiry e-mail via http://www.ascensionparish.net/ (http://www.ascensionparish.net/) from:
Shannon Allen <shannon@shannonallenonline.com (shannon@shannonallenonline.com)>
Mr. Bourgeois,
As I have received no reply to my email of March 23, 2011 concerning applicability of NEC 680.73 in residential construction, I must assume that your office has no opinion as to whether or not I should contact the office of the State AHJ, to address my concerns.
Thanks again for your time earlier, during our initial phone conversation where it was stated that there are plenty of homes being built in Ascension Parish "just like mine" with no accessibility to a hydromassage motor, without damaging the building finish.
To make the necessary repairs and to ensure the safety of my dwelling, I shall have a contractor begin this weekend, demolishing the surrouned and providing proper access to the electrical and mechanical equipment, and shall provide for video equipment to document this repair and any findings made upon obtaining proper access.
This video documentation shall be offered to the Louisiana Code Council for review of appicability; as my question to them shall include not only how a parish takes exception to a national code, but how it is allowed to violate LA. R.S. 40:1730.28.
Thanks again for your time.
Very best regards,
Shannon Allen
__________________________________________________ __________
Finally today, I get the following response:
RE: AscensionParish.NET: No Reply to email of March 23rd
Lavern Bourgeois lbourgeois@apgov.us (lbourgeois@apgov.us)
Sent: Mon 4/4/2011 7:17 AM
To: Shannon Allen
Cc: Richard Compton
Mr. Allen,
I have reviewed my e-mails received on Wednesday March 23, 2011, but I do not find that I received an e-mail from you on this date. If this is an error on my part or the parish's system I certainly apologize, but I can reply to your e-mail below.
Section 680.73 does address accessibility to a hydro massage bathtub without damaging the building structure or building finish.
This issue has been discussed many times in the pass due to the unsightly appearance of an access door if built into the front bottom side of the tub. There are some homes which have access from a side panel, but many homes do not have that pleasure but only the front bottom of the tub for an area to access. Also it has been found that the small access panel which is an acceptable access to the underside equipment for most part are very small and makes it difficult to make repairs or maintenance. The code does not state how large the access panel must be, but only states that the building structure or building finish is not to be damaged when repairs or maintenance becomes necessary. There have been many homeowners and contractors that have addressed this issue for acceptable access to the equipment of the tub by allowing the front panel to be caulked and thus when a repair or maintenance is necessary, simply cut the caulking with a utility knife for access. This method of access is not damaging the "Building Structure or Finish". By removing the entire front panel, this opens up the entire front thus more room for needed attention of the equipment. Once the repair or maintenance is complete, simply re-caulk the front panel.
There will be a Residential Contractor's Board meeting on Wednesday April 20, 2011, at 4:00 pm, at the Department of Public Works Conference room, 42077 Church Point Rd, Gonzales, La. 70737. If you wish, I can place this item on the agenda and you may address your concerns to the board. This board governs the Building Department of Ascension Parish and hopefully we can come to a resolve of this interpretation . Please let me know.
With Best regards;
Lavern Bourgeois CBO
Building Official
Ascension Parish
42077 Church Point Rd.
Gonzales, La. 70737
Office 225-621-5715
Fax 225-644-6044
__________________________________________________
So, do I go and see if I can convince a bunch of appointed locals that their interpretation of the code is incorrect or is there a better way to do this?
Thanks
Shannon
I know that accessibility to “hydromassage” mechanical and electrical equipment has probably been beaten to death here, however I sent the following email following a phone call to both the builder and to the Ascension Parish Building Official, both of which told me that there were thousands of houses being built just like mine and that if I wanted or needed access to the motor, just cut the surround off and there you go.
__________________________________________________ _______
Copy of: Review of Access to Whirlpool tub motor
Sent: Wed 3/23/2011 4:09 PM
AscensionParish.NET webmaster@apgov.us (webmaster@apgov.us)
Copy of:
This is an enquiry e-mail via http://www.ascensionparish.net/ (http://www.ascensionparish.net/) from:
Shannon Allen <shannon@shannonallenonline.com (shannon@shannonallenonline.com)>
Mr. Bourgeois,
Thank you for taking time yesterday afternoon to discuss with me, my confusion and concerns with code requirements for the residential installation of a whirlpool tub, in Ascension Parish.
I understand that your office has posted the following Mission Statement: “We provide Ascension Parish residents and contractors impartial and professional guidance through Planning, Zoning and Permitting procedures and to help economically grow and develop Ascension Parish while protecting the safety and property of our residents.”
If I understand our telephone conversation of yesterday afternoon, it is the position of your office that removal of a 24 square foot piece of marble (approximate dimension), by way of cutting through with a razor blade or similar object, and removing all caulking and/or adhesive materials is an acceptable means of access, as required by code, to the motor of such a whirlpool tub for maintenance or replacement of the motor or any electrical or mechanical equipment.
It is my understanding that Louisiana requires all buildings intended for human occupancy to adhere to IBC 2006, excluding Ch's 1, 11, 27, 29 with no amendments and NEC 2005 with no amendments, among of course a host of other codes.
The National Electrical Code (NEC), in particular, is a United States standard for the safe installation of electrical wiring and equipment and is part of the National Fire Codes series published by the National Fire Protection Association (NFPA). It is the “authority having jurisdiction” who inspects for compliance with these minimum standards. In the U.S., anyone issuing building permits may face a civil liability for negligently creating a situation that results in loss of life or property. Those who fail to adhere to well known best practices for safety have been held negligent. This has led to the NEC becoming the de facto standard set of electrical requirements in most jurisdictions. Please advise me if in fact Ascension Parish rejects or takes exception to this standard.
As I understand, the Louisiana (AHJ) for structural, mechanical and electrical concerns is Mr. Don Zeringue, Chief Architect with the Louisiana State Fire Marshal’s Office and would be the one to lend guidance to questions of interpretation of governing code, again correct me if I am mistaken here.
I thought that in December of 2005, the Governor of Louisiana, signed a bill calling for the state to adopt the International Building Code (IBC), International Existing Buildings Code (IEBC), International Residential Code (IRC), International Mechanical Code (IMC), and the International Fuel Gas Code (IFGC).
Looking to the International Residential Code for guidance, one would find that:
IRC SECTION P2720
WHIRLPOOL BATHTUBS
P2720.1 Access to pump.
Access shall be provided to circulation pumps in accordance with the fixture manufacturer’s installation instructions. Where the manufacturer’s instructions do not specify the location and minimum size of field fabricated access openings, a 12-inch by 12-inch (304 mm by 304 mm) minimum size opening shall be installed to provide access to the circulation pump. Where pumps are located more than 2 feet (609 mm) from the access opening, an 18-inch by 18-inch (457 mm by 457 mm) minimum size opening shall be installed. A door or panel shall be permitted to close the opening. In all cases, the access opening shall be unobstructed and be of the size necessary to permit the removal and replacement of the circulation pump.
And referencing the equipment manufacturer’s recommendations for installation of the subject tub, as noted in IRC Section P2720; citing the Mansfield Pro-fit Builders Series Whirlpools and Baths, Installation Manual, page 3 of 12:
“2. Literature dimensions are for general reference only. Installation dimensions should be taken directlyfrom the bath. AN ACCESS PANEL MUST BE PROVIDED AT THE PUMP END OF THE WHIRLPOOL allowing sufficient clearance to make final connections and for servicing the pump and power panel. Access of at least 12” x 18” (305mm x 457mm) may be through the wall or platform apron at the end of the unit, or in the case of sunken installations, through the ceiling below.”
And if one were to reference the 2005 edition of the National Electrical Code:
NEC 680.73 Accessibility.
Hydromassage bathtub electrical equipment shall be accessible without damaging the building structure or building finish. (Please note the “without damaging the building structure or building finish.”).
This has become problematic enough that the NEC addressed this issue again this year and expanded in the NEC 2011 to include:
“680.73 Accessibility
The accessibility of the receptacle supplying a hydromassage tub has been revised.
680.73 Accessibility.
Electrical equipment for hydromassage bathtubs must be capable of being removed or exposed without damaging the building structure or finish.
Where the hydromassage bathtub is cord-and plug-connected with the supply receptacle accessible only through an access opening, the receptacle must face toward the opening and be within 1 ft of the opening.
Analysis: When a hydromassage tub is cord- and plug-connected, it isn’t uncommon to find the receptacle beneath the tub arranged in a manner that makes it nearly impossible to see, much less use. Oftentimes, these receptacles are several feet away from the access opening, facing away from the person trying to access the receptacle. This change now requires that such a receptacle be installed close to the access opening (within 1 ft), and it must also be facing toward the opening.”
I am of the opinion that the use of a razor blade or similar object used to cut out the entire panel might well damage the finish, thus falling short of what I believe to be the intent of the code. While that position is by no means a professional opinion, I am certain that the fact that hundreds if not thousands of them being installed outside of code would in no way serve to amend code.
Considering these facts, while I appreciate and respect your professional opinion, I shall pose this question to the State AHJ for review?
Thanks,
Shannon Allen
_______________________________________________
Later, I sent this email to the Louisiana AHJ:
Ascension Parish Residential Construction - Hydromassage Tub Installation
Sent: Fri 3/25/2011 3:59 PM
To: don.zeringue@dps.la.gov (don.zeringue@dps.la.gov)
Mr. Zeringue,
To whom do I go for guidance regarding the proper installation of a hydromassage tub.
I have spoken to both the superintendent for the builder and to the Ascension Parish Chief Building Official, Mr. Levern Bourgeois
Lavern Bourgeois
Chief Building Official / 42077 Churchpoint Rd. / Gonzales, LA 70737
Ph. 225-621-5700
Fax. 225-621-5705
Both assure me that access to the motor can be had by way of cutting completely thru the caulking and adhesive material used to secure the 24 square foot piece of tub surround. When I questioned both regarding compliance with NEC 680.73;
NEC 680.73 Accessibility.
Hydromassage bathtub electrical equipment shall be accessible without damaging the building structure or building finish.
I was told that “there were thousands installed exactly like yours” and that this was not an issue, this by Mr. Bourgeois. I did reply by way of email but he has not responded.
I have even spoken with the manufacturer of the equipment, Mansfield; they pointed me in this direction:
Mansfield Pro-fit Builders Series Whirlpools and Baths, Installation Manual, page 3 of 12:
“2. Literature dimensions are for general reference only. Installation dimensions should be taken directlyfrom the bath. AN ACCESS PANEL MUST BE PROVIDED AT THE PUMP END OF THE WHIRLPOOL allowing sufficient clearance to make final connections and for servicing the pump and power panel. Access of at least 12” x 18” (305mm x 457mm) may be through the wall or platform apron at the end of the unit, or in the case of sunken installations, through the ceiling below.”
IRC SECTION P2720
WHIRLPOOL BATHTUBS
P2720.1 Access to pump.
Access shall be provided to circulation pumps in accordance with the fixture manufacturer’s installation instructions. Where the manufacturer’s instructions do not specify the location and minimum size of field fabricated access openings, a 12-inch by 12-inch (304 mm by 304 mm) minimum size opening shall be installed to provide access to the circulation pump. Where pumps are located more than 2 feet (609 mm) from the access opening, an 18-inch by 18-inch (457 mm by 457 mm) minimum size opening shall be installed. A door or panel shall be permitted to close the opening. In all cases, the access opening shall be unobstructed and be of the size necessary to permit the removal and replacement of the circulation pump.
The question only arose when the equipment failed and will not turn off – thus I cut it off in the breaker box. My original inquiry was only to ask where physically the motor was located so that I could cut a penetration for future service or maintenance. But the defensive nature that both took alarmed me, and if “thousands” are in fact installed that way here in Ascension Parish, I wonder if the electrical hook-up was even inspected on them; could this not be a safety issue that I should consider?
Your input is greatly appreciated.
For the record, I have no problem with cutting the surround out, but that would seem, at least to me, to damage the building finish. Too, I really don’t know what I would be getting into, as the builders superintendent told me that it was glued in place then caulked and the Parish official told me that it was not glued in place, only caulked in.
Shannon Allen
_______________________________________
Still no reply, so I did follow up with my original parish official on Friday:
Copy of: No Reply to email of March 23rd
Sent: Fri 4/1/2011 3:38 PM
Copy of:
This is an enquiry e-mail via http://www.ascensionparish.net/ (http://www.ascensionparish.net/) from:
Shannon Allen <shannon@shannonallenonline.com (shannon@shannonallenonline.com)>
Mr. Bourgeois,
As I have received no reply to my email of March 23, 2011 concerning applicability of NEC 680.73 in residential construction, I must assume that your office has no opinion as to whether or not I should contact the office of the State AHJ, to address my concerns.
Thanks again for your time earlier, during our initial phone conversation where it was stated that there are plenty of homes being built in Ascension Parish "just like mine" with no accessibility to a hydromassage motor, without damaging the building finish.
To make the necessary repairs and to ensure the safety of my dwelling, I shall have a contractor begin this weekend, demolishing the surrouned and providing proper access to the electrical and mechanical equipment, and shall provide for video equipment to document this repair and any findings made upon obtaining proper access.
This video documentation shall be offered to the Louisiana Code Council for review of appicability; as my question to them shall include not only how a parish takes exception to a national code, but how it is allowed to violate LA. R.S. 40:1730.28.
Thanks again for your time.
Very best regards,
Shannon Allen
__________________________________________________ __________
Finally today, I get the following response:
RE: AscensionParish.NET: No Reply to email of March 23rd
Lavern Bourgeois lbourgeois@apgov.us (lbourgeois@apgov.us)
Sent: Mon 4/4/2011 7:17 AM
To: Shannon Allen
Cc: Richard Compton
Mr. Allen,
I have reviewed my e-mails received on Wednesday March 23, 2011, but I do not find that I received an e-mail from you on this date. If this is an error on my part or the parish's system I certainly apologize, but I can reply to your e-mail below.
Section 680.73 does address accessibility to a hydro massage bathtub without damaging the building structure or building finish.
This issue has been discussed many times in the pass due to the unsightly appearance of an access door if built into the front bottom side of the tub. There are some homes which have access from a side panel, but many homes do not have that pleasure but only the front bottom of the tub for an area to access. Also it has been found that the small access panel which is an acceptable access to the underside equipment for most part are very small and makes it difficult to make repairs or maintenance. The code does not state how large the access panel must be, but only states that the building structure or building finish is not to be damaged when repairs or maintenance becomes necessary. There have been many homeowners and contractors that have addressed this issue for acceptable access to the equipment of the tub by allowing the front panel to be caulked and thus when a repair or maintenance is necessary, simply cut the caulking with a utility knife for access. This method of access is not damaging the "Building Structure or Finish". By removing the entire front panel, this opens up the entire front thus more room for needed attention of the equipment. Once the repair or maintenance is complete, simply re-caulk the front panel.
There will be a Residential Contractor's Board meeting on Wednesday April 20, 2011, at 4:00 pm, at the Department of Public Works Conference room, 42077 Church Point Rd, Gonzales, La. 70737. If you wish, I can place this item on the agenda and you may address your concerns to the board. This board governs the Building Department of Ascension Parish and hopefully we can come to a resolve of this interpretation . Please let me know.
With Best regards;
Lavern Bourgeois CBO
Building Official
Ascension Parish
42077 Church Point Rd.
Gonzales, La. 70737
Office 225-621-5715
Fax 225-644-6044
__________________________________________________
So, do I go and see if I can convince a bunch of appointed locals that their interpretation of the code is incorrect or is there a better way to do this?
Thanks
Shannon