View Full Version : Techshield failure
Brenda Ledbetter
01-27-2012, 02:51 PM
I found this in an attic in the Houston area this afternoon. I've never seen Techshield damaged in this way. The decking was dry to the touch so it doesn't seem to be a moisture problem. The Techshield was was actually brittle and crumbled when I touched the decking. Only small sections of the decking has this problem; not the entire attic.
Any ideas as to a cause? I could not see where any H clips were used.
Nolan Kienitz
01-28-2012, 06:29 AM
Common failure of the radiant barrier covering of Techshield. Missing clips don't have anything to do with the barrier "sticking" to the decking.
Generally is a manufacturing issue.
Brenda Ledbetter
01-28-2012, 06:36 AM
After I posted my question I did another search of Inspection News in the "Attic Areas" section and found several posts regarding this same question. Apparently this isn't as unusual as I thought.:rolleyes:
Thanks for the help Nolan!
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.