PDA

View Full Version : Disposal outlet



Jack Feldmann
08-27-2007, 05:46 PM
Outlet under sink for disposal. Was a tad loose and didn't work right either.

Shannon Guinn
09-27-2007, 07:10 AM
It appears like this may have been the work of a DIY'er, or a hack. I would hate to think that a reputable EC would have done something like this.

Bruce Breedlove
09-27-2007, 02:45 PM
Jack,

You're getting picky lately, aren't you? You expect the outlet to not be loose AND work right?

Jerry Peck
09-27-2007, 04:14 PM
And Shannon, a county electrical inspector, expects it to have a box! ;)

At least it's grounded. :D

Nolan Kienitz
09-27-2007, 08:13 PM
... At least it's grounded. :D


This end of the wire is anyway. ;)

Michael Greenwalt
09-28-2007, 05:16 AM
But you overlooked the good points: Adjustable, accessible, mobile, easily inspectible. Geez, some inspectors are never satisfied :)

William Brady
09-28-2007, 05:42 AM
the major defect in this picture is NO STEEL WOOL IN THE HOLE TO PREVENT THE MICE FROM COMING IN!!!!!!!!!!!!!!!

Michael Thomas
09-28-2007, 07:25 AM
Also, looks like it might be 12 AWG into the backstabs...

... and whoever installed that fastener pushing through for the other side might have received a BIG surprise.