gary carroll
09-04-2012, 10:28 AM
The fan hung from treaded rods passing through the electrical box.
The rods hung from a bracket evidently made for the purpose.
However, the bracket was held up by a flattened beer can with a nail through the center.
Essentially the beer can was acting as a washer, preventing the 1/4 inch nail head from passing through the 3/4 inch hole in the bracket.
On the plus side, the nail was at least ring-shank.
The rods hung from a bracket evidently made for the purpose.
However, the bracket was held up by a flattened beer can with a nail through the center.
Essentially the beer can was acting as a washer, preventing the 1/4 inch nail head from passing through the 3/4 inch hole in the bracket.
On the plus side, the nail was at least ring-shank.