3 prone dryer plugs

[M Kelekci]

Do you all write up when 3 prone dryer plug ( instead of 4 prone) is present?

Thanks,

[Bruce Breedlove]

prong

[Billy Stephens]

Do you all write up when 3 prone dryer plug ( instead of 4 prone) is present?

Thanks,

M Kelekci,

Dryers are sold without the cord so you may match your 3 or 4 prong outlet. Newer construction has 4 prong outlets not sure of the exact changer over date from 3 prong.

This is not a defect no writeup.

[John Arnold]

Check this thread:
http://www.inspectionnews.net/home_inspection/electrical-systems-home-inspection-commercial-inspection/868-3-wire-dryer-receptacle-outlet.html

[Scott Patterson]

Do you all write up when 3 prone dryer plug ( instead of 4 prone) is present?

Thanks,

Why would you write it up? 4-Prong is the new way, but the 3-Prong works just fine.

[Jim Luttrall]

I will mention it to buyers on occasion if it is in a relatively modern house since their new dryer/cord won't fit. On older homes I usually skip it since that type of thing is/should be expected.
Not a defect, just a comment.

[Randy Aldering]

Keep in mind that installation manuals clearly indicated that a grounding bond conductor had to be connected to a ground source with the old 3-prong 240 volt whips. The new 4-prong whips make that unnecessary.

[Nolan Kienitz]

I mention simply as an FYI as to which (3 or 4) is present just so the buyer is aware.

EG: If their current dryer has a 3-prong cord and the newer home has a 4-prong outlet ... it won't be a surprise.

When asked by the client I simply say to check out their local hardware store, big-box store or (if they so choose) an electrician for options.

;)