PDA

View Full Version : Direct vent location


Clay E White
09-23-2007, 06:40 PM
.......
Michael Thomas
09-23-2007, 07:04 PM
I've learned via the consumption of a considerable quantity of crow that you have to check each manufacturer's instructions - some allow placement closer than (I anyway) expected.
Bob Harper
09-23-2007, 09:51 PM
Per each Fp listed instructions but usually btw 6-12". Some vary if window operable or fixed shut. Different clearances for below, aside or above windows, doors, decks, corners,--enough for a whole page. Cannot generalize or assume.
Robert Dalga
09-24-2007, 04:51 AM
Clay,
I wouldn't have a problem with it if that large window to the right of it as shown in photo is fixed (i.e. non-operable).
BARRY ADAIR
09-24-2007, 06:01 AM
Clay,
I wouldn't have a problem with it if that large window to the right of it as shown in photo is fixed (i.e. non-operable).

Seriously doubt these to be stationary units due to all viewable units having the lower sash screened, but there is always that chance.