PDA

View Full Version : Safety glass?



Jeff Eastman
09-26-2007, 12:13 PM
.............

John Arnold
09-26-2007, 12:24 PM
If the "exposed area" (IRC language) of that bottom pane is 35 inches wide and it is square, then it isn't greater than 9 square feet and so wouldn't have to be safety glazed.

BARRY ADAIR
09-26-2007, 01:03 PM
and to expand on Jonh's information the window pictured is not an equally sized upper and lower sash therefore the lower sash would be less than 35" tall/high. Non-tempered OK by code but a simple advisement to your client should not be questionable.

John Arnold
09-26-2007, 01:06 PM
and to expand on Jonh's information the window pictured is not an equally sized upper and lower sash therefore the lower sash would be less than 35" tall/high.
Hey, no fair. You're using arithmetic!

BARRY ADAIR
09-26-2007, 01:18 PM
Hey, no fair. You're using arithmetic!

Nope, just looked and top was bigger, just like I like 'em. :D

BTW with this post I've reached my boiling point.

John Arnold
09-26-2007, 02:05 PM
BTW with this post I've reached my boiling point.
215? You must be below sea level.
Hey, wait a minute. The posts aren't being added up. I have two that say Posts: 406 and you have two that say Posts: 215. What the ...?
Now I'm really confused. Since I posted on another thread, now all my posts on this thread say Posts: 407!
I'm taking a nap.