mathew stouffer
01-21-2013, 05:52 PM
Did ITE produce a split bus bar panel?
Jim Luttrall
01-21-2013, 06:07 PM
I don't know if they did or not but that does not appear to be a split bus panel. Notice the power goes through the mains before the buss bars.
Jerry Peck
01-21-2013, 06:09 PM
That's not a split bus panel, the service entrance feeds the top terminals to which the main breaker is connected, the breaker is between the main terminals and the bus bars below, meaning that the main breaker will (should) remove power to the bus bars below.
mathew stouffer
01-21-2013, 06:43 PM
Thanks. Don't see man of those around here
Powered by vBulletin® Version 4.2.0 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.