Cutler Hammer Panel

[Donald Hobson]

Hello all

This is a Cutler Hammer Panel. I'm assuming that these breakers are made for 2 wires.
100A service
Thanks

[Bruce Ramsey]

Then your assumption would be wrong.

[Jim Port]

Some CH Classic are listed for use with two conductors.

[Donald Hobson]

Then your assumption would be wrong.
Can you elaborate

- - - Updated - - -


Some CH Classic are listed for use with two conductors.

These were listed as Class CTL OH 120 volt 1 pole unit

[Donald Hobson]

Hello

Anything definitive would help

Thanks

[Mark Reinmiller]

I believe the Cutler Hammer breakers listed for two wires have a screw head to hold the wires and small protrusions on each side of the screw to keep the wires from slipping out to the side.

[Jim Port]

They are new enough that you can check by going to a big box and looking at the labels on the side of the breakers.