sinlge wire in double pull breaker

[cory nystul]

Can you have a single wire in a double pull breaker?
31065

[Vern Heiler]

Can you have a single wire in a double pull breaker?
31065
Yes, but it does need to be correctly identified as non-grounded and the circuit needs its own neutral. I can't tell what the rest of the circuit is by the picture.

[John Kogel]

I think Vern misunderstood the wiring you described and the pic is ???.
There is no rule prohibiting using only one pole of a double pole breaker to power a 120 volt circuit.

You should try using an old fashioned camera with a flash. You will catch more defects with a flash, I guarantee it.

[cory nystul]

I think Vern misunderstood the wiring you described and the pic is ???.
There is no rule prohibiting using only one pole of a double pole breaker to power a 120 volt circuit.

You should try using an old fashioned camera with a flash. You will catch more defects with a flash, I guarantee it.

Thanks for tip on a flash. I'll try to remember that next time my camera breaks randomly.

[Jerry Peck]

You should try using an old fashioned camera with a flash.

How "old fashioned"?

Glass plate?

Brownie?

35 mm film?

Digital?

Cellphone ("newer" ones have a flash)?

[Rick Cantrell]

How "old fashioned"?

Glass plate?

Brownie?

35 mm film?

Digital?

Cellphone ("newer" ones have a flash)?
I use an instamatic 110 with flash cube
But my Polaroid swinger is good when I want to see the picture now.
:D

[Loren Sanders Sr.]

I use an instamatic 110 with flash cube
But my Polaroid swinger is good when I want to see the picture now.
:D

Rick, I will try to upload a better photo of the panel

- - - Updated - - -


I use an instamatic 110 with flash cube
But my Polaroid swinger is good when I want to see the picture now.
:D

Rick, I will try to upload a better photo of the panel

- - - Updated - - -


I use an instamatic 110 with flash cube
But my Polaroid swinger is good when I want to see the picture now.
:D

Rick, I will try to upload a better photo of the panel

[Vern Heiler]

I think Vern misunderstood the wiring you described and the pic is ???.
There is no rule prohibiting using only one pole of a double pole breaker to power a 120 volt circuit.

You should try using an old fashioned camera with a flash. You will catch more defects with a flash, I guarantee it.

The "yes" was in response to the original question; the rest of the response was to nudge him into looking a little deeper!