TcDuhon
11-14-2014, 09:36 AM
Hello,
my furnace is not working. It doesn't even cycle. Which I am guessing it has to do with bad inducer motor or pressure switch. I do the sucking thing on the tube to the pressure switch and nothing. Motor is not hot and does spin freely. I replaced the board about 3 yrs ago. Its an old Arco-aire 70,000 BTU gas unit.
The LED blinks once at start up meaning "system lockout".
Is it sounding like I need to replace the inducer motor?
my furnace is not working. It doesn't even cycle. Which I am guessing it has to do with bad inducer motor or pressure switch. I do the sucking thing on the tube to the pressure switch and nothing. Motor is not hot and does spin freely. I replaced the board about 3 yrs ago. Its an old Arco-aire 70,000 BTU gas unit.
The LED blinks once at start up meaning "system lockout".
Is it sounding like I need to replace the inducer motor?