View Full Version : Spark arrestor
Jeff Eastman
12-10-2007, 04:06 PM
..........
Michael Thomas
12-11-2007, 07:51 AM
My though is that if it's clamped on tight enough to withstand high winds, the point-force at the flue tile might predispose it to cracks.
Richard Stanley
12-11-2007, 08:06 AM
We have hundreds of them. The clamps hold ok, but, the rest of it corrodes and disintegrates after a few years. Flashing doesn't have any glaring defects - the crown perimeter may allow water penetration to the chase.
Robert Stephens
12-11-2007, 08:15 AM
The flashing appears to be a 2 piece saddle and appears to be in good shape. However I would be concerned with seal at brick line.
Richard Stanley
12-11-2007, 10:46 AM
Chimney caps with 5/8" mesh or with 3/4" mesh: What's the Difference? (http://www.fireplacemall.com/Article_Library/5_8__Mesh_Chimney_Caps/5_8__mesh_chimney_caps.html)
Here is more info.
Also - google - chimney spark arrestor
Powered by vBulletin® Version 4.2.0 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.