Michael Thomas
12-17-2007, 06:55 AM
While doing some research on cricket (saddle) flashings at chimneys I ran across the article below. Almost all of the crickets I see here are metal, but thinking back I have seen a few that were shingled instead, and I realize that I had perhaps not given them enough thought at the time. This installation looks to me like asking for trouble (both details such use of roofing paper rather than ice and water shield and the reliance on sealants ("I usually use a lot of roofing tar to fill any gaps around the valley areas"), and the general complexity of the shingling in this small area) but I thought I would get the opinions of others here, and also ask more generally if others here have encountered problems with shingled crickets.
Roof Modifications - Building A Saddle (http://www.hammerzone.com/archives/roof/saddlesm/frame.html)
Shingling A Small Roof Saddle (http://www.hammerzone.com/archives/roof/saddlesm/shingles.html)
Roof Modifications - Building A Saddle (http://www.hammerzone.com/archives/roof/saddlesm/frame.html)
Shingling A Small Roof Saddle (http://www.hammerzone.com/archives/roof/saddlesm/shingles.html)