PDA

View Full Version : Help Please



Zibby Swieca
02-06-2008, 01:02 PM
What is wrong here.
Thanks

Michael Thomas
02-06-2008, 01:29 PM
For starters, primary condensate drain untrapped and improperly connected, secondary not connected, looks like incorrect materials used to seal various penetrations at the "A coil" housing, suspicious discoloration at draft hood... got a wider angel pic of the entire installation?

Jim Luttrall
02-06-2008, 01:32 PM
I really like the tape holding the wires on the front of the furnace cabinet.;)

Zibby Swieca
02-06-2008, 01:38 PM
No I don’t have another Pic.
The unit is 20 years old.
Thanks for help
Zibby

Rick Hurst
02-06-2008, 02:08 PM
They shouldn't be using Wilks Inc.

Jerry Peck
02-06-2008, 02:34 PM
What is wrong here.
Thanks


They shouldn't be using Wilks Inc.

That's what I always used to tell my clients 'Do not use whoever the seller has been using ... THEY created all these problems, why would you expect them to know or understand how to correct the problems'.

Bob Harper
02-06-2008, 03:56 PM
Looks like single walled vent connector stuffed onto a B-vent reducer.

Yes, the acrylic adhesive in that tape will eventually fail and those wires will fall down.

Primo job!
Bob

Billy Stephens
02-06-2008, 04:09 PM
Red Garden Hose?

.........And..........