David Macy
02-18-2008, 09:09 AM
I would like to inquire on the proper way to clean a masonry fireplace?
The flue is 8 X 12. I purchased a rectangular 8 X 12 brush. I need to purchase the rods. My home is a ranch with easy roof access.
I have a top of chimney damper cap.
How is the top of the damper cap attached to the flue? Does the cap just pull off?
How is the smoke shelf area cleaned between the flue and original damper. This is where the majority of the creosote build up is. Do I need to purchase a smaller brush and clean from inside?
I have both dampers installed as I get back drafting at times and this helps with the odors.
I have been paying a professional to clean my chimney. He installed a cozy heater a few years ago.
When I purchased a new set of glass doors I realized he did a poor job installing the heater. I custom cut the openings in the glass door bottom trim to accommodate the blower vent openings & control knob.
He charges about $125 each time. The brush & rods cost about $50.
Thanks for the help.
If you need any photos of the top damper, flue, smoke shelf or firebox I can provide.
The flue is 8 X 12. I purchased a rectangular 8 X 12 brush. I need to purchase the rods. My home is a ranch with easy roof access.
I have a top of chimney damper cap.
How is the top of the damper cap attached to the flue? Does the cap just pull off?
How is the smoke shelf area cleaned between the flue and original damper. This is where the majority of the creosote build up is. Do I need to purchase a smaller brush and clean from inside?
I have both dampers installed as I get back drafting at times and this helps with the odors.
I have been paying a professional to clean my chimney. He installed a cozy heater a few years ago.
When I purchased a new set of glass doors I realized he did a poor job installing the heater. I custom cut the openings in the glass door bottom trim to accommodate the blower vent openings & control knob.
He charges about $125 each time. The brush & rods cost about $50.
Thanks for the help.
If you need any photos of the top damper, flue, smoke shelf or firebox I can provide.