Smoke Generators for By-Passes

[Rick Fluharty]

Does any on use Smoke Generators During an Inspection? I find it as a good Client Ed Tool.
But not sure which one is Better. Any ideas. I was looking at a powder-Puffer,
Puffer Canister or a Smoke Pen.

Any Input !!

[Billy Stephens]

Rick,

I don't use any smoke generators.

The few I've seen are the powder puffers.

I check the gas water heater for spillage with a mirror.

If the blower motor door is leaking you can strike a match and blow it out quickly for a small amount of smoke.

Heck I'm Happy if it has a door and the kick out switch works when I remove it. :)

[Jim Luttrall]

Dosen't Any one use a Blower Door to Check Air Change or to find By-Passes

I thing we are talking about energy rater blower door testing, not furnace blower door switches.

I don't use 'em my self.

[Billy Stephens]

I thing we are talking about energy rater blower door testing,


Jim,

Thanks long day not paying Attention.

[David Banks]

Here you go Billy!
YouTube - sam the sham and the pharaohs 'wooly bully' (http://www.youtube.com/watch?v=JJOvCHD1uHY)