PDA

View Full Version : corrosion around threads



william siegel
04-20-2007, 05:37 PM
This is a three year old heat pump unit in a condo. What would cause the corrsion around the water connections.

Sorry about the poor quallity picture.

Nick Ostrowski
04-20-2007, 05:53 PM
Condensation building up on the uninsulated section of the suction line in cooling mode.

Bruce Breedlove
04-20-2007, 07:28 PM
The new message board is less than 3 weeks old and we already have corrosion around the threads! What is the world coming to? :D

Jerry Peck
04-20-2007, 09:14 PM
Except those are not refrigerant lines, those are chiller lines.

There is/was/has been leakage there, most likely at the top joint.

Looks like 'newer' pipe thread tape.

Probably 'was' leaking.

Tim Moreira
04-20-2007, 09:20 PM
What's the odds on an electrolysis problem???

Just a thought.

What were the materials???

Jerry Peck
04-20-2007, 09:41 PM
What's the odds on an electrolysis problem???

Just a thought.

What were the materials???


Water ... running down ... metal ... equals ... rust. :p

Tim Moreira
04-20-2007, 10:02 PM
I was questioning the green stuff next to the Teflon tape at the top fitting???

John Arnold
04-21-2007, 04:48 AM
"Looks like 'newer' pipe thread tape."
Man, I have got to get some new glasses. Jerry - what kind do you use?