View Full Version : Flashing
Reis Pearson
03-16-2008, 06:39 AM
I've run into this a couple of times and have been referring to it as improperly installed drip edge and wanted to get some feedback from the forum. I see major flaws in this design and wanted to know if this is a common practice or I just have the pleasure of running across the same roofer who hasn't had any problems with it?? :confused:
Scott Patterson
03-16-2008, 08:32 AM
Yes it is wrong. The metal drip edge goes under the shingles.
Nick Ostrowski
03-16-2008, 08:42 AM
Reis, that method of installation is common...........amongst people who don't know what they're doing.
Brandon Chew
03-16-2008, 09:25 AM
There was probably an inspection done prior to yours and the inspector wrote up the lack of drip edge, so they "fixed" it.
Looks like a good way to rot out the fascia and roof decking. You don't get any rain in Seattle, do you? ;)
What Nick said...
Michael Thomas
03-16-2008, 10:07 AM
http://www.nrca.net/rp/technical/files/4898.pdf
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.