PDA

View Full Version : Help needed with ID of receptacle



Michael Thomas
04-23-2007, 02:04 PM
What is the intended polarity/voltage of the lower receptacles?

And what would likely have been drawing current from these - there is one on an enclosed front porch, and another behind in on the interior of the exterior front wall.

Jerry Peck
04-23-2007, 02:38 PM
The closest configuration I could find is a 208 volt 30 amp, but that would not be on duplex, it would be a single receptacle.

Sooooo ... got me.

Tim Moreira
04-23-2007, 09:58 PM
Wow,

Never saw that before.

208v would be three phase. *Could be* but *not likely* on a residential home.

May be some kind of recreational outlet????

Michael Thomas
04-24-2007, 04:37 AM
Over at Mike Holt they pointed me here:

ECN Electrical Forums: 4 Prong Duplex Receptacle (http://tinyurl.com/2rsqxp)
ECN Electrical Forums: 4 Prong Duplex Receptacle (http://www.electrical-contractor.net/forums/ubbthreads.php/ubb/showflat/Number/151838/page/4#Post151838)

Appears that this is designed to accept either a 120 or 240 15A ungrounded plug.

I'm still wondering what might have been plugged into it.

Jerry Peck
04-24-2007, 06:50 AM
Very interesting.

Thanks for the info.