PDA

View Full Version : Gas and oil resistant wires



wayne soper
08-08-2008, 07:07 PM
I can't find any info on reasons for this install. Panel is a sub next to the main in the garage. any thoughs would be appreciated.

Jim Luttrall
08-08-2008, 07:11 PM
Think about what the oil resistant wires supply... maybe a grease pit, pump or other equipment where oil is likely contaminant?

wayne soper
08-08-2008, 07:13 PM
Yes, That's my dilemma. None of the above. No sump no grease nunca, nada.

James Duffin
08-08-2008, 07:13 PM
What loads do the blue wires feed?

Ted Menelly
08-08-2008, 07:27 PM
Had some extra wire and did not feel like running to the supply house.

Oh yeah. You really did not use the words sub when referring to any panel did you :)

From what I hear around here there is no such thing as a sub panel even though I have used the term all my life.

Jerry Peck
08-08-2008, 08:14 PM
Oh yeah. You really did not use the words sub when referring to any panel did you :)

From what I hear around here there is no such thing as a sub panel even though I have used the term all my life.

Were you in the navy? They have a fleet of boats which operate underwater and use those sub panel things. :D

Jerry Peck
08-08-2008, 08:16 PM
I can't find any info on reasons for this install.


Had some extra wire and did not feel like running to the supply house.

Best reason of all, and very common too.

"Because it was on the truck."

Ted Menelly
08-08-2008, 08:32 PM
""Because it was on the truck."

I did forget that part didn't I

"Were you in the navy?"

No, just had a sub for dinner and It stuck in my mind :)

Jerry Peck
08-08-2008, 08:42 PM
No, just had a sub for dinner and It stuck in my mind :)

Hmmmm ... whenever I have a sub for dinner, it gets stuck in my throat or my stomach, ... never tried sticking in through my ears. :D

Ted Menelly
08-08-2008, 08:43 PM
Cute Jerry

wayne soper
08-09-2008, 06:42 AM
Yes I like the wires were on the truck, and were installed at the hoagie shop on a submarine. Thanks guys

Rollie Meyers
08-10-2008, 06:28 PM
A lot of THHN /THWN is also listed as MTW (Machine Tool Wire) Oil & Gasoline resistant.

Brian Thomas
08-10-2008, 06:59 PM
They have malibu lighting too. Awesome