Results 1 to 6 of 6
-
09-25-2007, 05:46 PM #1
Member
- Join Date
- Mar 2007
- Location
- Spring Hill (Nashville), TN
- Posts
- 5,851
A new way to support a hip rafter
Found this today on a McMansion.
Similar Threads:
-
09-25-2007, 06:07 PM #2
Member
- Join Date
- Aug 2007
- Location
- Memphis TN.
- Posts
- 4,311
Re: A new way to support a hip rafter
Scott,
At least he only used 2 layers of shingle for shims.
Got to love that plastic vent.
It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
Billy J. Stephens HI Service Memphis TN.
-
10-02-2007, 03:12 PM #3
Member
- Join Date
- Mar 2007
- Location
- Ingleside Illinois
- Posts
- 118
Re: A new way to support a hip rafter
Looks like someome lost there full time job and took another job as a journeyman carpenter.
-
10-02-2007, 03:33 PM #4
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,042
Re: A new way to support a hip rafter
Ow, ow, ow ... "journeyman" "implies" some knowledge and training.
Originally Posted by Bill Wieczorek
Just buying a hammer and a saw does not make one a "journeyman".
I'd say a 'wannabe'.
-
10-02-2007, 05:16 PM #5
Member
- Join Date
- Mar 2007
- Location
- Connecticut
- Posts
- 1,828
Re: A new way to support a hip rafter
I'd say friday afternoon at 4:25
-
10-02-2007, 07:31 PM #6
Member
- Join Date
- Mar 2007
- Location
- Ingleside Illinois
- Posts
- 118
Re: A new way to support a hip rafter
Ow, ow, ow ... "journeyman" "implies" some knowledge and training.
Just buying a hammer and a saw does not make one a "journeyman". I'd say a 'wannabe'
Agreed but haven't you ever seen journeymen work that looks like this picture ? I have and the journeyman claimed he'd been in the biz 20+ years.
Reply With Quote
Bookmarks