Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2007
    Location
    Charleston, WV
    Posts
    77

    Default crazy looking truss

    I have never seen trusses like these before. The house was built in 1979. The roof structure appeared fine. What could be the reason for the gap where the gussets are located? Anyone no what the hole in the gussets is for?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance
    Greg Jenkins

  2. #2
    Ron Bibler's Avatar
    Ron Bibler Guest

    Default Re: crazy looking truss

    Look like a good place to run some Electrical wire!!!


  3. #3
    Join Date
    Apr 2008
    Location
    Massachusetts
    Posts
    195

    Default Re: crazy looking truss

    It looks like a hinged truss to me. The truss is designed to be folded up for ease in transport (usually for long span trusses; also seen often in modular homes)


  4. #4
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: crazy looking truss

    Quote Originally Posted by Greg Jenkins View Post
    I have never seen trusses like these before. The house was built in 1979. The roof structure appeared fine. What could be the reason for the gap where the gussets are located? Anyone no what the hole in the gussets is for?

    Greg,

    Were those factory pressed in gusset plates with the hole 1 piece ? If so would think they were for utility line access.

    If they are 2 piece my concern would be it's missing a structural connector rod that would fit through the hole from truss to truss.

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  5. #5
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: crazy looking truss

    Quote Originally Posted by Steve Frederickson View Post
    It looks like a hinged truss to me. The truss is designed to be folded up for ease in transport (usually for long span trusses; also seen often in modular homes)
    What Steve said.


  6. #6
    Join Date
    Mar 2007
    Location
    Charleston, WV
    Posts
    77

    Default Re: crazy looking truss

    Nothing about these trusses gave the appearance that they hinged. The gusset is one piece with a hole through the middle. They looked like they were installed in a factory.
    However, the gusset on the top part of the truss at the ridge (not visible in the picture) was made of wood and appeared to be nailed together on site.

    Greg Jenkins

  7. #7
    Join Date
    Mar 2007
    Location
    Georgetown, KY
    Posts
    538

    Default Re: crazy looking truss

    Look REAL CLOSE, Greg.

    The holes are the swivel between the two truss plates.

    I don't usually see this except on a manufactured home or a modular home.

    Was the home identified as manufactured or modular.

    Here's just one example for you.

    Scherer Brother Lumber Company - MiTek Truss Products

    Erby Crofutt, Georgetown, KY - Read my Blog here: Erby the Central Kentucky Home Inspector B4 U Close Home Inspections www.b4uclose.com www.kentuckyradon.com
    Find on Facebook at: https://www.facebook.com/B4UCloseInspections

  8. #8
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: crazy looking truss

    Ding, Ding, Ding... and we have a winner.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  9. #9
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: crazy looking truss

    Quote Originally Posted by Jim Luttrall View Post
    Ding, Ding, Ding... and we have a winner.
    But they look like they are not installed correctly.
    .
    .


    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  10. #10
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: crazy looking truss

    Billy,

    The setup you showed is for a different purpose.

    The ones in the photo are designed to allow the upper part of the truss to be swung down during transport, making the overall height of the transported modular unit low enough to clear bridges and overpasses.

    When set up on site, the upper portion is swung back up into place and then mated with the other matching like truss from the other modular unit being mated to the first one.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  11. #11
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: crazy looking truss

    Quote Originally Posted by Jerry Peck View Post
    Billy,

    The setup you showed is for a different purpose.

    The ones in the photo are designed to allow the upper part of the truss to be swung down during transport, making the overall height of the transported modular unit low enough to clear bridges and overpasses.

    When set up on site, the upper portion is swung back up into place and then mated with the other matching like truss from the other modular unit being mated to the first one.
    Lot's to learn,

    Thanks.

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •