Results 1 to 7 of 7
  1. #1
    Herb Scott's Avatar
    Herb Scott Guest

    Default I need a detail.

    Gentlemen,
    I need a detail. I would show a photo but donít know how to transfer it from my photo program to this post.
    I need a section detail of an exterior wall with a solid stone veneer about 4 ft. high with a slate cap and cement board siding above it. (it could be any type of siding above) Itís a wood framed wall. I can see tyvex where the siding abuts the slate cap and many of the slate are either level or have negative slope towards the house. How is this supposed to be flashed to prevent water penetration into the wall structure at this joint? Or do we depend on caulk, the tyvex, and hope it drains out at the bottom. I know what the problems are but I need a detail to show how it should be built.
    Thanks, Herb Scott

    Similar Threads:
    2018 ASHI InspectionWorld

  2. #2
    Ron Bibler's Avatar
    Ron Bibler Guest

    Default Re: I need a detail.

    Try this site its just one of many that can be found on the net.

    ftp://imgs.ebuild.com/woc/m970675.pdf

    Best

    Ron

    Last edited by Ron Bibler; 04-22-2009 at 12:31 AM.

  3. #3
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,170

    Default Re: I need a detail.

    Technical Notes

    You might find something here or at the rest of the info at BIA site.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  4. #4
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: I need a detail.

    Herb:

    This may be of help.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  5. #5
    Herb Scott's Avatar
    Herb Scott Guest

    Thumbs up Re: I need a detail.

    Thanks, Guys
    Kudos to Brian for a great forum.
    I put a request help in the evening and have several details to put in my report when I wake up.
    Thanks, again.
    Herb


  6. #6
    Join Date
    Aug 2008
    Location
    San Antonio, TX
    Posts
    77

    Default Re: I need a detail.

    AD, Where did you get that detail. Very good.....

    sm


  7. #7
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: I need a detail.

    Quote Originally Posted by Stephen Meyer View Post
    AD, Where did you get that detail. Very good.....

    sm
    Stephen: I really don't remember. I've been collecting them for 13 years now and have lost count of the number or origin of most.

    Sorry.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •