Thread: anyone know the siding manuf

Can anyone id this siding? It is a fiberboard composite installed in 1990/1991.Attachment 26038

Similar Threads:

• Siding stains
• Wood Structural Panel Sheathing or Siding Used to Resist Combined Shear & Uplift
• Siding Interface with Chimney
• Multiple siding layers
• Siding question

look up Hardi-plank or board

Thanks but it is not a james hardi product that far back. I suspect it is one of the big boys that had class action law suits against them: Masonite X-90, Abitibi Price perhaps, GP maybe. I have seen it around a few times just don't know who made it.

you supplied a one dimensional photo... meaning shots of the bottom, side , back cuts, hell it could be be vinyl..

Originally Posted by Michael Bronner

Thanks but it is not a james hardi product that far back. I suspect it is one of the big boys that had class action law suits against them: Masonite X-90, Abitibi Price perhaps, GP maybe. I have seen it around a few times just don't know who made it.

.
Take Your Pick

Status of Class Action Suits involving Composite Sidings
.

omniwood cedar lap is one brand that has the distinctive vertical mill markings across the grain
http://www.sidingsolutions.com/pages...od%20types.pdf
verification would require removal to view the back for id

Barry,

Thanks for the good info and pics. But Masonite Omni-Wood siding came after Masonite X-90 siding which is the early stuff with the suit. I know most suits have expired and the claims period for a home of this age (22 years) is probably past as well. I was just hoping to be able to tell my client something definative.

If you really want to know remove a piece and there should be a Manufacture stamp on back.

Taking out a piece is not to hard.

Is there some reason you need to know the Manufacture ?

Originally Posted by Michael Bronner

Can anyone id this siding? It is a fiberboard composite installed in 1990/1991.Attachment 26038

Weyerhaeuser -