Thread: Foil insulation and electricity are like water and electricity - they don't mix well

Foil insulation 'a recipe for disaster'

I may be that i am missing the obvious but how did they drive staples thru the wire and then into the foil?

Originally Posted by Jeff Zehnder

I may be that i am missing the obvious but how did they drive staples thru the wire and then into the foil?

I take it that they were using the staples to install the foil. Driving staples through the foil and hitting an energized wire resulting in the death.
The likely have wire strung haphazardly through the attic with no nail protection like it is here.
Seems that it would be the installers fault though, not really the material. It does point out the dangers of electrically conductive materials installed near electrical.

Home insulation scheme crippled by dodgy installers

http://www.smh.com.au/federal-politics/political-news/home-insulation-scheme-crippled-by-dodgy-installers-greg-combet-20140516-zrep7.html


"........overseas call centres were cold-calling households to sell insulation and then employing untrained university students to install it,......."

Read more: Home insulation scheme crippled by dodgy installers: Greg Combet

Jim L. - Correct on all points.