Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2007
    Location
    WESTMINSTER CO
    Posts
    1,154

    Default BALCONY HANDRAIL HEIGHT

    HEY ALL

    a big spring snow storm here in colorado and not a help to that knee i blew out falling off the roof last week, but getting around. surgery next week, but dam i'm busy.

    oh well

    1895 home--totally redone, but second floor railing is only 28" high. what is the code and proper height for that. three kids under 10 years old in house

    thanks

    gimpy charlie

    Similar Threads:
    Inspection Referral

  2. #2
    Join Date
    Mar 2008
    Location
    Charlotte NC
    Posts
    2,304

    Default Re: BALCONY HANDRAIL HEIGHT

    Minimum guardrail heigh for single family is 36".


  3. #3
    Join Date
    Apr 2007
    Location
    WESTMINSTER CO
    Posts
    1,154

    Default Re: BALCONY HANDRAIL HEIGHT

    THANKS VERN

    i found it just after posting

    thanks


  4. #4
    Join Date
    Mar 2007
    Location
    Healdsburg, CA
    Posts
    1,741

    Default Re: BALCONY HANDRAIL HEIGHT

    The California Building Code as of Jan. 1, 2008 requires minimum guard rail height at landings, porches, decks, and balconies more than 30 inches above grade to be 42 inches in vertical height.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Jerry McCarthy
    Building Code/ Construction Consultant

  5. #5
    Join Date
    Apr 2007
    Location
    WESTMINSTER CO
    Posts
    1,154

    Default Re: BALCONY HANDRAIL HEIGHT

    thanks jerry good photo for my reports

    charlie


  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: BALCONY HANDRAIL HEIGHT

    Quote Originally Posted by Jerry McCarthy View Post
    The California Building Code as of Jan. 1, 2008 requires minimum guard rail height at landings, porches, decks, and balconies more than 30 inches above grade to be 42 inches in vertical height.

    WC Jerry,

    Would you clarify the wording shown on the left side:

    4" diameter sphere shall not pass (<4.375 diam. sphere within units in Groups R-2 and R-3) ... "within" ... is the word I am interested in.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •