Results 1 to 4 of 4
Thread: Can you help with this panel ?
-
02-20-2009, 09:47 PM #1
Ron Bibler Guest
Can you help with this panel ?
I think this guy has just about over stuff every hole. L.O.L.
What a mess
And then to top it off this panel is 30 feet below ground with an under ground service. The main is at the top of the driveway some 100 feet away with a Zinsco 200amp Main on the side of a pole...
Best
Ron
Similar Threads:Last edited by Ron Bibler; 02-20-2009 at 10:06 PM.
-
02-20-2009, 09:58 PM #2
Member
- Join Date
- Aug 2007
- Location
- Memphis TN.
- Posts
- 4,311
Re: Can you help with this panel ?
Thread title: Can you help with this panel?
Ron,
Here You Go.
.
It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
Billy J. Stephens HI Service Memphis TN.
-
02-20-2009, 10:14 PM #3
Member
- Join Date
- Mar 2007
- Location
- Oregon
- Posts
- 2,365
Re: Can you help with this panel ?
I agree with Billy....
As for the specifics, I'll wait the others to chime in. In general, that looks like either a newer Zinsco or a total rewire (done by Billy Bob homeowner, I'm sure).
I don't see any cables older than about 1970's. Most Zinsco panels I see are from the 50's or early 60's but I did run across one that I think was in the mid to late 70's.
-
02-21-2009, 06:41 AM #4
A.D. Miller Guest Re: Can you help with this panel ?
Ron: It is a Zinsco which is a true mess, and a shame. Why go to all that trouble to rewire an arc welder in a box.
Originally Posted by Ron Bibler
I think this guy has just about over stuff every hole. L.O.L.
What a mess
And then to top it off this panel is 30 feet below ground with an under ground service. The main is at the top of the driveway some 100 feet away with a Zinsco 200amp Main on the side of a pole...
Best
Ron
Reply With Quote
Bookmarks