Results 1 to 6 of 6

Thread: Fitting on JB

  1. #1
    John Stephenson's Avatar
    John Stephenson Guest

    Default Fitting on JB

    Last edited by John Stephenson; 12-22-2007 at 08:06 AM.
    Inspection Referral

  2. #2
    James Duffin's Avatar
    James Duffin Guest

    Default Re: Fitting on JB

    While I have never seen one, there could be a fitting that accepts two UF cables. You would need to look at the fitting and see if has two separate holes in the rubber insert. If it has only one then I doubt it would seal two wires properly.


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Fitting on JB

    I know they make those for one cable, but, like James, I've never seen one for two (it's probably made for one and has two in it).

    Did you write up that leaking roof?

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Charles Sessums's Avatar
    Charles Sessums Guest

    Default Re: Fitting on JB

    See the red stains under the 2x. Thats water traveling Dude.


  5. #5
    Charles Sessums's Avatar
    Charles Sessums Guest

    Default Re: Fitting on JB

    Second thoughts. Caulk joints and is that rust on the staple? Jerry? By the way I hate the look at the photo and guess thing.


  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: Fitting on JB

    John,

    With 6" clearance above it, and with those water stains on that one and not the one sticking out into the wind driven rain more that the inner one, I would suspect the top of the one with the water stains is decaying out (and that decay is causing the staining).

    Just another thought based on the new information about the photo.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •