Results 1 to 3 of 3
  1. #1
    Eric Laney's Avatar
    Eric Laney Guest

    Default Weird wire attachment in FedPac

    Jumpers from one breaker to another appeared to be welded or even glued on. I hope someone has seen this and it is made that way. Comments needed.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Weird wire attachment in FedPac

    Eric,

    That's one version of a split bus panel.

    Did you treat that as service equipment, i.e., no more than 6 breakers to remove power, neutrals bonded to ground, etc.?

    I guess I should add ... not that it matters, it's an FPE after all ...

    Thus it needs to be replaced.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: Weird wire attachment in FedPac

    Eric - The first time I saw one of those I wasn't sure what it was, until I posted the exact same question on this board.

    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •